PDA

View Full Version : got my new turbo but need 2 hose bits, where from? called?


midge
05-09-2009, 16:21
right i just paid for my new turbo (gt28r) its from a 200sx, which means i need to hose type bits to connect the hose's up, i have no idea what thier called but i have seen some on ebay before, where can i get them from? (i cant find any on ebay becasue i dont know what thier called!) the bits i need bolt on to the parts on the turbo i have circled

http://i2.photobucket.com/albums/y48/52egdim/GT28Rcircles.jpg
walters300
05-09-2009, 18:47
hi mate, i have the same turbo, you will need to twist it a bit to get it to fit, i will have a look tomorrow on ebay to see if i can see anyting like what i have, to be honest i think its the standard items whish have been altered to suit, where did you get the turbo and how much, cheers :wink:
midge
05-09-2009, 21:38
twist it? how do i do that?

really need dangdi to see this as im sure he will know what the bits are called!
Coops
05-09-2009, 22:10
no idea what bits are mate am afraid

to twist it need to undo the bolts holding compressor to bearing housing and rotate the compressor housing so its orientated correct way to match up to your boost pipework when the turbos mounted at correct angle on the manifold on the exhuast side
jay s
05-09-2009, 22:32
think they are called t25 inlet flanges, you only need inlet as your actual turbo looks like it has a normal oulet

only one i could find on ebay at the min for £40 and from usa , 100% be able to get them over here tho....
http://cgi.ebay.com/ebaymotors/Turbo-Inlet-Flange-Adapter-2-5-for-GT28R-GT25R-T25-T28_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQha shZitem2a00e18910QQitemZ180403407120QQptZMotorsQ5f CarQ5fTruckQ5fPartsQ5fAccessories

http://i10.photobucket.com/albums/a117/jay16v-/pics129.jpg
http://i10.photobucket.com/albums/a117/jay16v-/pics130.jpg
http://i10.photobucket.com/albums/a117/jay16v-/pics131.jpg
sideways danny
06-09-2009, 03:32
inlet flange/stub pipe and outlet flange can be bout from www.atpturbo.com

http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-FLA-011&Category_Code=BCS

http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-FLS-056&Category_Code=VSR2
sideways danny
06-09-2009, 03:35
also just found on ebay under "gt28r inlet" and "gt28r outlet"
midge
06-09-2009, 12:59
Dan do you know if the stock ones from a 200sx will fit? and how do i rotate the turbo ? ive read you just undo the bolts and twist it tehn do them up again?
sideways danny
06-09-2009, 18:54
to rotate the housings (do one at a time) slacken the bolts a little and tap the housing round with a rubber mallet.

200sx parts aren't straight, they are elbows at both ends. Pulsar inlet flange would work though
midge
06-09-2009, 20:45
Dan so i can rotate the exhaust and inlet housings seperatly, at seperate times, meaning i can have it all at any angle i want, meaning i can line up all my lines, then turn the exhaust housing to where it needs to be, then turn the inlet to where it needs to be?

You can expect a few pms when it gets here and i start fitting it ;)

Oh and thanks for the links. only bit i need now is the high boost chip :)
Justin..
06-09-2009, 21:19
yeah all 3 parts can be put in any direction you like. just make sure the actuator rod is still able to open & shut the wastegate and tat the oil drain is at the bottom