View Full Version : Fixxing clean16vs monster'd willy box
I stripped this down with my mate Tayor (Im bringing him to RTOC and Ty coes)
Wasn't that bad tbh .....fixed now, well we think lol
Problem was the diff housing was cracked, so we tryed to fit a valver housing......only to find there different due to the willy boxes uprated bearings.
Just thought some may find that info interesting
the JC5 (williams box) has press fitted gearing and uprated bearings iirc
the JB3(valver box) has std bearings and circlips to hold the gears in place iirc
not 100% on that not read on system for a few month what it was!
yea think it was a bit of a bugger and still in process of getting repaired aint it :P
am still in need of a desent gearbox as well :cry:
That sounds bang on richy :D
Still collecting dead boxes for taylor....boris lol
clowo16v
14-07-2005, 12:26
Give me a chance to race mine and check survival and I might have found a good gearbox lol.
See ya
Matt
good, mines going to go very shortly cosidering buying a brand new 1, After a williams one like what clean got :roll:
clean16v
15-07-2005, 10:50
Very interesting, so waht caused it to fail? The circlip gace up and teh diff collapsed?
will a megane jc5 box fit in a 16v?
it should do the wiliams runs a jc5, just need to check the speedo drive if its for cable or new plug on sensor, think thats it
and the mount to the battery tray is diff. also the speedo is cable on the valvr.........not on the meg
VIPERONE
18-07-2005, 07:26
the megane gearbox:
the electric speedo sensor ccan be removed and replaced with valver on..
the gearbox fits, however the bracket is different so needs to be fabricated/made for the gearebox mounting
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.