PDA

View Full Version : Wheel Spacers



darkfibre
09-08-2009, 10:36
Can anyone recommend a preferred width of a pair of hubcentric spacers for the rear of my Willy? Will 10mm either side be enough to fill out the rear arches (similar to the look of the widetrack at the front)?

Allan
12-08-2009, 00:22
i don't think your going to find hubcentric spacers which are 10mm, as they need to be bolted to the existing hubs, you could have someone machine a flat 10mm tick spacer and use long wheel bolts or do a stud conversion.

I did reply to you pm about some of this too.

Coops
12-08-2009, 10:07
i run a ktec flat 10mm per side spacer kit on the rear, no wobbles or anything, bob on, was about 50 quid inc longer bolts iirc

darkfibre
12-08-2009, 20:04
Food for thought, cheers guys.

ThRaXaIR
12-08-2009, 21:29
where can i get some extended bolts to allow for a 10mm spacer from?

cheers

schakal
12-08-2009, 21:53
where can i get some extended bolts to allow for a 10mm spacer from?

cheers

extended bolt shop :idea: :idea:




ebay mate :D

Coops
12-08-2009, 23:35
ebay, can spec any length pretty much if you find a shop

or ktec do 35mm for the rears, spot on

Allan
13-08-2009, 11:02
i got mine from larkspeed,