PDA

View Full Version : Front Copper Brake pipes (lengths needed)



simonr85
03-08-2009, 09:14
Quick question how long are the front left and right copper brake lines?? i need some made up, its the copper 1s that run from master cylinder to the flexi hose.

Cheers

simonr85
07-08-2009, 10:45
does anyone have the part number for these from renault??

My local renault dealer dont know which pipes i need

Cableguy
07-08-2009, 13:37
Drivers side one 12" will do it, not sure on pass im yet to replace it :)

simonr85
07-08-2009, 14:12
Drivers side one 12" will do it, not sure on pass im yet to replace it :)

nice 1, can you let me know. Does it matter if the lengths are slightly different to standard???

Cableguy
07-08-2009, 14:14
Nope , as long as you dont go silly on it. Copper bends far easier than the steel thats fitted from factory so you can lose some by making sweeping bends etc..

If you remove the old pipe from the car and take it to a motor factors they would knock both sides up for you for less than a tenner.

simonr85
07-08-2009, 14:47
Nope , as long as you dont go silly on it. Copper bends far easier than the steel thats fitted from factory so you can lose some by making sweeping bends etc..

If you remove the old pipe from the car and take it to a motor factors they would knock both sides up for you for less than a tenner.


i know a place that will do it i just cant get there with no brake lines so was going to just get a straight length made and bend them myself

BRUN
07-08-2009, 18:38
do you have the tool to bend it ?

if you dont it will kink