View Full Version : "UNDER PRESSURE"
Just a quickie, oil pressure gauge occasionally working , what might it be?
Before i take a hammer to it the weekend.........ta! :?
16v_paddy
14-07-2009, 22:35
Dodgy sensor or a bad connection on the sensor, possibly the wiring between the sensor and the gauge :?
Either way hammer ftw :twisted:
Cheers Paddy, if its the sensor can you get at it from under the motor?
16v_paddy
15-07-2009, 08:04
Should think so, just cant remember which sensor on the block it is that reads the pressure :?
I did ask which sensor is which in a thread on here somewhere with pics of my engine for reference
It's the sensor on the black of the block above the oil pump.
Can get to it if you take drivers side wheel off or from underneath IIRC
It has a single spade connector. Careful you don't break it!
Its okay Wobba i will be very careful with the hammer...... :wink:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.