View Full Version : will the conversion go to plan???
right this weekend is the long awaited weekend for my valver conversion to give the 1.2 a bit more welly!
here is a list of things that need doing:
Re-fit valves (re-lapping done)
Rebuild head
Fit new clutch
Re attach gearbox
Change wiring loom from an r19 one to a clio one
Remove 1.2 engine and box
change springs to valver front springs
Remove Driveshafts
Fit valver driveshafts
Change engine mounts
change clutch cable
change accelerator pedal
Fit new HT leads
Fit valver engine in
wire into oil dials
replace alarm wires (looks like a 5 year old was let loose)
change fuel pump
all this is aiming to be done and me drive away by sunday night startign at about 7 pm friday night with 2 of us doing it!
answers on a postcard!!!!
lol i like your thinking winst! well at least all positives so far! 8)
Smokey McPot
12-07-2005, 18:06
You'll be done by saturday night.
VIPERONE
12-07-2005, 19:25
you'll be delayed in to week , where you will finish it...:-D then you will attend the nw to test it on my test track.
lol pull ya finger out rich! get it sorted and enjoy!
It will happen, but thigns will go wrong, and you will be delays, things ALWAYS go wrong :roll:
Slithers
12-07-2005, 20:56
wiring loom will **** you over IMO
loom is gonna be one of the easy bits as i have all the diagrams!
lewis_willy2
13-07-2005, 09:11
things always go wrong, make sure u think of all ova parts ie gaskets,oils,seals etc cuse most place shut at 1 on saturdays( renault does in my area) is do able but ive been on and off with mine for a month now and got an alarm/electric problem which is in the process of geetin sorted!
you'll be delayed in to week , where you will finish it...:-D then you will attend the nw to test it on my test track.
sounds like a good script to me! when the bank balance has less of a minus figure i will definately have to come up to your private test track and give it some abuse :wink:
just a little update for you guys, all the valves are back in now and we are ready to build theengine back up! just gotta wait for my mate to get home as the parts are all in his garage locked up! hoping to get it rebuilt and the cams back in tonight and possibly the 1.2 engine out :D
conversion has suffered a temporary setback as the 19 engine i'm using has a different cambelt cover which i need to get, also i need an alternator bracket to run my manual rack which i will sort out too so its postponed for a few weeks at least!
Willyhybrid
17-07-2005, 09:29
Man you're lucky your not like me because that would drive me bonkers?
yeah it really pissed me off! i was thinking about buying a valver with a snapped cambelt and taking the bits i needed off of the bent engine and making a good done out of 2 and using the valver shell, then i decided that i only need to put another £80ish in and it should go in
stop moaning and get it done man!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.