Allan
26-06-2009, 20:31
How much slap should i be seeing with forged pistons ?
This seems quite a lot...
http://www.youtube.com/user/Mrnigglesworth
Basicly rebuilding this block and the pistons will be coming out, but want opinions from poeple who have fitted forged if this is too much movement....
And if it is what to do to fix it.
Bores on the block look fine and i measured it with some cheap vernias which read 82.8mm but they are very cheap ones so could be out..
anyways its wossner low comp pistons in a f7r 700 block
This seems quite a lot...
http://www.youtube.com/user/Mrnigglesworth
Basicly rebuilding this block and the pistons will be coming out, but want opinions from poeple who have fitted forged if this is too much movement....
And if it is what to do to fix it.
Bores on the block look fine and i measured it with some cheap vernias which read 82.8mm but they are very cheap ones so could be out..
anyways its wossner low comp pistons in a f7r 700 block