High spec clio 16v turbo engine

[matty w]

--------------------------------------------------------------------------------

hi all have a 1.8 16v turbo engine forsale,i'll list engine spec below
1.8 16v f7p
je forge low comp pistons
arrow steel conrods
arp rod bolts
knife edge crank & balanced (very expensive!!!!)
lightened & balanced flywheel
piper cams & vernier pullies
could have headwork havnt had manifolds off
bb manifold with t28 turbo,braided oil feed
turbo downpipe
modified sump for oil return
green injectors (21 turbo i think)
2 bar map sensor
front mount intercooler with all pipework
forge dump valve
mapped ecu by fastchip
there you go if you wanted to build an engine to the same spec you'd be talking massive money,the engine has only done 15k and was in a car that was featured in maxpower,i bought the car to break,the car went to holland to be mapped by fastchip i think it made 240bhp may be able to deliver if not too far from west midlands i will get some pictures up,serious enquiries only £1600

[Justin..]

Bargain!

[Allan]

This sounds like Tony16 valvers old one

[matty w]

its not mate,the engine was in a maxpower featured clio,i was told it was running 10psi,but would handle quite a bit more with a bottom end to that spec,i dread to think how much the crank cost

[Coops]

that spec of engine should in theory handle upto 30psi of boost i would of thought

[Laine_16v]

its not mate,the engine was in a maxpower featured clio,i was told it was running 10psi,but would handle quite a bit more with a bottom end to that spec,i dread to think how much the crank cost

Why? knife edging and balancing a crank doesnt cost *that* much, in the scheme of things in that engine build.

Unless its a forged crank.

[clio turbo]

the car this has actually come form is a show car which was a blue/green flip paint with big 18" wheels the lot.

[matty w]

heres a pic i've got of the pistons & rods as we took the sump off just to make sure it was the spec we where told,the only reason i said about the crank as its had a load machined off and my mate who does engine machining said that a load of work had gone in to it

http://i708.photobucket.com/albums/ww81/mattyw450/002.jpg
heres one of the flywheel next to a standard flywheel
http://i708.photobucket.com/albums/ww81/mattyw450/006-1.jpg

[matty w]

heres some pics of the engine,the cooler is pace but the name on the front prism motorsport are the people who built the engine if you do a search for them you will see they work on time attack evo's etc

[matty w]

heres some pics of the engine,the cooler is pace but the name on the front prism motorsport are the people who built the engine if you do a search for them you will see they work on time attack evo's etc
http://i708.photobucket.com/albums/ww81/mattyw450/009-2.jpg
http://i708.photobucket.com/albums/ww81/mattyw450/004-1.jpg
http://i708.photobucket.com/albums/ww81/mattyw450/003-1.jpg
http://i708.photobucket.com/albums/ww81/mattyw450/008-2.jpg
http://i708.photobucket.com/albums/ww81/mattyw450/010-2.jpg

[Brealbags]

where u based mate?

[matty w]

hi mate i'm in the west midsmbut can deliver if not too far my number is 07855965124 if you want to message me
cheers matt

[Brealbags]

Im just working out what ill need to complete the conversion.

What gearbox's are suitable. ?

Anything else needed you can think of to drop in a phase 2 valver?

[matty w]

you can use all the stuff off your car mate,all thats needed is wiring loom,gearbox,driveshafts etc

[Brealbags]

So i could use my gearbox and driveshafts. Are you not supplying the wiring harness?

[matty w]

we took the loom off mate because it was tatty and i wernt happy selling it,havnt you got a valver?it comes with the fast chip ecu,it will be going on ebay soon

[matty w]

bump £1450

[matty w]

still forsale due to timewaster £1350 no offers

[raviedavie]

wasnt this on ebay ?

[matty w]

wasnt this on ebay ?

yes mate someone won the bidding and then made no contact with me,i've sent them emails and my phone number but no reply,it really annoys me because its a waste of money listing it

[raviedavie]

wasnt this on ebay ?

yes mate someone won the bidding and then made no contact with me,i've sent them emails and my phone number but no reply,it really annoys me because its a waste of money listing it

yeah i can appreciate that , i trust youve made a complaint ?

[matty w]

not yet,seems strange because there feedback is 100% i wonder if they wernt expecting to win and hadnt got the money,but i'd respect someone if they where honest with me and just say they cant afford it

[raviedavie]

so can this just drop into a williams then ?

[Justin..]

yup

[raviedavie]

so what else would be required then or is it all pretty much ready to go ?

[Justin..]

just an engine loom iirc, but you could use your williams one

i've used a valver loom on a williams engine / ecu on my turbo and its fine

[raviedavie]

i am rather tempted , looks a beast :lol:

[Justin..]

Do it! i remember at fcs you were asking about power upgrades!

[Justin..]

if iu was to buy it i'd redo the i/c piping too it looks mess :/

[raviedavie]

yeah i was , been thinking about itbs charger and turbo etc

[matty w]

if iu was to buy it i'd redo the i/c piping too it looks mess :/

it looked pretty neat when it was in the car,i thought it was a pretty decent pipe run

[Justin..]

hmm i spose you wouldnt see it when installed

[matty w]

sold