PDA

View Full Version : wilwood 280mm 4 pot set up



diditno
17-06-2009, 16:03
you will firswtly need 16"s or bigger to run this kit. only used for 3 weeks. mainly due to noise, ie they do squeel a little.

comes with 3 week old wilwood dynalite 4 pots
2x 280mm discs again 3 weeks old
1x set of mintex 1144 pads, i have the polymatrix
ones if needed.
also has the spacers/adaptor for the calipers.

on ebay now
http://cgi.ebay.co.uk/clio-williams-clio-1-8-16v-wilwood-4-pot-set-up_W0QQitemZ290324958902QQcmdZViewItemQQptZUK_Cars Parts_Vehicles_CarParts_SM?hash=item4398b74eb6&_trksid=p3286.c0.m14&_trkparms=65%3A10%7C66%3A2%7C39%3A1%7C240%3A1318%7 C301%3A1%7C293%3A1%7C294%3A50

queegan
17-06-2009, 17:34
if you are talkin about the front calipers then they fit under 15s as i have them behind my willy wheels

zmaster2k
17-06-2009, 18:08
buy itnow price?

diditno
17-06-2009, 18:20
if you are talkin about the front calipers then they fit under 15s as i have them behind my willy wheels

with 280mm discs, i thought the biggest you could go was 256mm?

bass_direct
17-06-2009, 18:37
biggest you can go on 15's is 285mm, 256/259 is just the standard size..

diditno
17-06-2009, 18:39
fair enough, i thought you need to have 16"s minimum. cheers

Evogone
17-06-2009, 19:06
biggest you can go on 15's is 285mm, 256/259 is just the standard size..

295 and 300 can be made to fit...

midge
17-06-2009, 21:45
pm'd. i will bid on ebay if you wont sell early! where did you get the kit from?

diditno
17-06-2009, 22:01
pm'd and i got it from gdi

dhay14
17-06-2009, 22:20
pm'ed mate

diditno
17-06-2009, 22:48
all pm's replied too

Allan
19-06-2009, 14:15
have got superlites and you can fit 298.5mm rotors under a 15" williams wheel, so it depends on which calipers you use

midge
19-06-2009, 19:10
will gdi sell the brackets seperatly? i'd love to go up in size on disc's

diditno
24-06-2009, 10:29
not long left now. go on grab a bargain

cheers