PDA

View Full Version : trackday looming and car still isnt fully fixed!


richy
09-07-2005, 22:44
doh

still waiting for new springs to arrive, also gotta strip hubs off tomorro to fit new bearings as there whining like fcuk and getting worse each time i drive it!!

and when i go into a highish speed left hander i get a rubbing/groaning nosie from the front end!!

fecking clios!! :x
Martin
09-07-2005, 23:10
mine makes a nassty noise from the rear left every time I go round a quick(ish) left hander + I need tracking done, new brake pads and could do to poly seal the engine mounts... :?
richy
09-07-2005, 23:11
:x
edde
09-07-2005, 23:17
IS this the wales track day or the one on Wednesday.

Don't worry you'll never be as bad as me. I had the car's iginition system was in pieces and the car wouldn't start plus I had to change all the locks the day before I was due to go to Germany O this was at about 5pm and I was going 5am the next morning.
richy
09-07-2005, 23:24
wales mate, :)
VIPERONE
10-07-2005, 00:36
martin i can get black or whte poly sealant for a £5er
Martin
10-07-2005, 00:41
crackin fella thats cheap...you're not coming to pod though are you?.. could have got it off you.. :?
GazTwo
10-07-2005, 11:05
C'mon lads get em sorted, don't want to have to ask northy to buy a club trailer or maybe a transporter..... :lol:
Zollo
10-07-2005, 15:19
Don't panick lads. At least you're not 30bhp down on power and over an inch up on ride height :P

I'm going to be absolutely flying around Anglesey, just you see :?
Martin
10-07-2005, 16:16
LOL thats made me feel better....sure you'll get sorted though.
richy
10-07-2005, 16:33
lol transporter may be needed !!

at the mo mine is sat on axle stands again with the front hubs off!! both me frotn bearings are fubarred! lol be done by next week :)
Zollo
10-07-2005, 20:57
LOL thats made me feel better....sure you'll get sorted though.

Here's hoping!

Not too bothered about the power thing for now, but the ride height thing needs sorting before, otherwise I'm gonna have to find myself a trackday banger quick sharp...
richy
12-07-2005, 20:59
just in middle of fitting new front bearings now, hoping me springs arrive soon so can get them settled in and adjust to handling !

think thats it! (touch wood)
richy
16-07-2005, 17:25
well mines almost done now, new bearings etc fitted, found out cause of rubbing noise! the o/s/f wing has some light rubbing marks on it from under high speed left corners! left it lol will wear away lol

still waiting on springs!!
edde
16-07-2005, 19:42
I wish I was on the state some of you all are.
I need
Two new driveshafts and I've not got either.
The bolts remove holding the bottom ball joint to the hube removing (its stuck soldi)
And the whole supension and stearing built back up
richy
16-07-2005, 19:44
doh!

mines got a few minor bits to sort but tbh ive done a fair bit in last month or so to get it ready! spent alot on it!!!

hopefully it will be sorted for ya soon!