torque settings

[jw]

hi i have a williams 3, and have to rebuild the engine can anyone tell me the torque settings for the following.....head bolts,,,cam cover bolts,,,big end bolts,,,and crank main bolts,
did ask at renault but there not very helpfull were i live, cheers guys..

[Laine_16v]

Main ends are 60-65Nm, Big Ends are 45Nm, Cam cover are 12Nm.

Not sure about Headbolts cant remember the sequence.

[jw]

cheers does anyone have a workshop manuel as they dont seem to be covered in the haynes engine wise??

[MAXIBOY]

stage one..30nm
stage two..angle tighten by 50 degrees
stage three..wait for 3 minutes
stage four...loosen all bolts completely
stage five..25nm
stage six...angle tighten by 108 degrees +-3 degrees

same as the 1.8 lump in every case engine wise..