PDA

View Full Version : Megane F7R & most parts to rebuild it



16v_paddy
23-04-2009, 03:02
Time to get rid of my meggy lump as I'm not rebuilding it any more.

http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2282.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2227.jpg

I didn't take any pics of the rest of the bits :oops: but I've got the whole engine minus a few nuts & bolts that had to be destroyed to remove them :twisted: also got 2 meggy ecu's and a meggy loom
I've had the bores and the crank measured, the bores are standard size and the crank doesn't need a regrind. The guy who measured it for me estimates the mileage to be around the 80-100k mark.

I'll throw the engine stand as well £250 ono

Now the rebuild bits, I bought all of this stuff from stan @ APD, so not cheap & nasty shite :wink:

F7R head gasket set £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2446.jpg

Bottom end gasket set £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2445.jpg

head bolts £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2447.jpg

crank main bearings £50 ono
big end bearings £60 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2448.jpg

thrust washers £30
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2440.jpg

Wossner forged low compression pistons :twisted: £350 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2442.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2443.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2454.jpg

Tanks
23-04-2009, 19:05
Stop being a pansy paddy and turbo the naples.

16v_paddy
23-04-2009, 19:13
can't be bothered with mine any more :( besides I'm getting rid so I can buy that yellow valver with the itb'd 172 lump, a 350bhp pulsar or an integra type r :wink:

Justin..
23-04-2009, 19:38
sell me the wossner sticker lol

donsrno1
23-04-2009, 20:15
an integra type r :wink:

Good choice!

or alternatively you buy the yellow clio and I'll then swap with you for my DC2 :lol:

16v_paddy
23-04-2009, 20:36
sell me the wossner sticker lol

£350 for the sticker & the pistons come for free :wink: :lol:

PM me your address & I'll post it

This is the teg I want http://www.pistonheads.co.uk/sales/976107.htm

treishu
03-05-2009, 23:55
hello there. do you still have the old pistons? the 2.0 litre ones?

16v_paddy
04-05-2009, 00:14
hello there. do you still have the old pistons? the 2.0 litre ones?

replied to your thread on C16v :wink:

Neal 19 16v
06-05-2009, 22:09
What thickness is the large oil seal in the BE set? 8mm or 12mm?

16v_paddy
06-05-2009, 22:13
What thickness is the large oil seal in the BE set? 8mm or 12mm?

Couldn't tell you mate tbh :oops: but the 2 gasket sets and the head bolts are now sold

summeh
06-05-2009, 22:41
710 or 714 ?

Evogone
06-05-2009, 22:48
710 or 714 ?

Are there 2 different gasket sets ? though 1 gasket set did all F4Rs ?

Mmmmmm

16v_paddy
07-05-2009, 01:26
710 or 714 ?

Are there 2 different gasket sets ? though 1 gasket set did all F4Rs ?

Mmmmmm

Is that question for me :?: if it is you've confused me now :?

MAXIBOY
07-05-2009, 01:38
engine i think..

F7R 710 megane or later F7R 714 engine...

its an F7R 710 ...i can tell

16v_paddy
07-05-2009, 08:21
In that case

it's a 710