Jaymzfc
17-04-2009, 08:07
Hi,
Im preparing myself for a big job next mnth of changing the entire wiring loom when i fit in the new engine. no whats concerning me is this.
I purchased a 1.8 16v FP7 engine from one guy and a complete wireloom inc ecu from another guy, will there be a problem setting it up of is it just a case of setting it all up and off you go with a lot of swearing in between.
My mechanic just mentioned that sometime unless the ecu is from the same engine there can me problems.
any advice will be greatly appreciated
regards
James
Im preparing myself for a big job next mnth of changing the entire wiring loom when i fit in the new engine. no whats concerning me is this.
I purchased a 1.8 16v FP7 engine from one guy and a complete wireloom inc ecu from another guy, will there be a problem setting it up of is it just a case of setting it all up and off you go with a lot of swearing in between.
My mechanic just mentioned that sometime unless the ecu is from the same engine there can me problems.
any advice will be greatly appreciated
regards
James