PDA

View Full Version : The time is near...


Martin
05-07-2005, 22:30
:D

http://img177.imageshack.us/img177/8879/pic0km.jpg
KingStromba
05-07-2005, 22:34
What wishbones are they?
Martin
05-07-2005, 22:35
Williams
big hp
05-07-2005, 22:36
Bet you cant wait :D
Martin
05-07-2005, 22:39
Should be good, looking forward to the track day to test them fully. 8)
KingStromba
05-07-2005, 22:43
Williams track?
Martin
05-07-2005, 22:45
yes... all new bits from reno as you can see!
KingStromba
05-07-2005, 22:45
Good man.
richy
05-07-2005, 23:05
will u be doing this with the car on axle stands? if so just make sure u got enough room to get the ARB in as it was tight on bayliss's old en to fit it on, other then that have fun!!
Martin
07-07-2005, 22:09
just need to slam it a bit now...

http://img177.imageshack.us/img177/170/willytrack23la.jpg
richy
07-07-2005, 22:14
cant see any pics?
Martin
07-07-2005, 22:15
I can :?
richy
07-07-2005, 22:18
i can now they was white box with red x lol

get it lowered now takes 5 mins :wink:
edde
07-07-2005, 22:19
Marin I'm not sure what poundage spring etc your using but I found the car cracked the arches when I backed of the dampers on the track hence I've had to go back to the setting you had.

When I get a chance I'm going to get some spare arches spray them up and cut a huge bit out of them and lower the car further. I'm sure with stiffer springs (£50) theres another 3cm or so lowering in there. My Spax setup only had 5cm or so free on the damper with no probelm the gaz coilovers have about 8cm still.
Martin
07-07-2005, 22:24
Will take it down a bit tommorow if I have time...don't want it too low tbh I have some bumpy roads round my way.
Winston
08-07-2005, 00:14
Ready for war :twisted:
Jan
08-07-2005, 07:56
Awesome 8)
northy
08-07-2005, 08:03
very nice mate..

are you fitting them yourself ?
Martin
08-07-2005, 17:58
eh they are already on northy see the pic lol But no did'nt do it myself..