PDA

View Full Version : Prima Alloys, Williams Manifold / Downpipe, Magnex Exhaust..



Adi82
02-04-2009, 20:38
I have some un-wanted Williams bits I need to sell so hear goes.

Prima replica Williams alloys, in good condition with some small scratches and curbing. Very clean condition however as can be seen from the photo showing the inside of the wheel. Could do with a refurb to make mint. I also have the orginal centre cap stickers. Looking for £100

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/AllReplicaAlloys.jpg

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/Replica1.jpg

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/Replica2.jpg

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/Replica3.jpg

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/Replica4.jpg

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/ReplicaBack.jpg

Williams manifold in good condition with all fixings and gasket if it can be used again, Looking for £40

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/CIMG2592.jpg

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/CIMG2593.jpg

Williams down pipe in good condition, Looking for £30 will do the manifold and downpipe for £60

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/CIMG2594.jpg

Williams silenced decat, in good condition has a small dent on the bottom and some scratches. Looking for £30

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/CIMG2595.jpg

Magnex stainless steel exhaust centre section, has been welded around the silencer a few years ago but is still good. Looking for £25

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/CIMG2596.jpg

Magnex stainless steel back box 3" inward rolled tip, in good condition, Looking for £45

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/CIMG2597.jpg

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/CIMG2598.jpg

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/CIMG2599.jpg

Bosch Lamda sensor for Williams in good working condition, Looking for £25

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/CIMG2590.jpg

Original Renault fuel lines both feed and return, feed has been shortened by 10mm but still usable, Looking for £20

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/CIMG2591.jpg

Manifold heat shield, not in the best condition but there if anyone wants it. Looking for £10

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/CIMG2588.jpg

16V Front Bumper in 449 blue In good condition all fixings there and no cracks. Has a few scuffs on the sides and a deepish scratch in the centre. Looking for £10

http://i3.photobucket.com/albums/y76/ajr83rt/Parts/FrontBumper.jpg

I am open to offers on all items. Collection from Oxford on the bigger items. Will post the fuel lines and lamda sensor.

Thanks

Adi

willyturb0
02-04-2009, 20:51
pm'd
:D

d-diddy
02-04-2009, 23:52
shame your not closer or i would of had those wheels

Robb
03-04-2009, 10:26
Dibs on williams manifold and downpipe, PM'd

J8TRO
03-04-2009, 11:22
Dib Dabs on the Wheels mate...sent you a PM.

cliorod
03-04-2009, 13:25
Adi.

A pm sent,regarding the exhaust bits. :wink: :wink:
Rod

Adi82
03-04-2009, 19:47
Ok update on whats gone and whats not. I have done this on a first come first served for collection of parts.

Wheels and bumper sold (Willyturb0)

Manifold and downpipe sold (magnumpi)

Wizards_449
04-04-2009, 09:19
aup mate, ill have the exhaust please. The backbox.And the centre section. Where abouts are you located..
Many thanks
Danny

If the guy pulls out on the wheels can i please have 2nd dibs on them. Many thanks

Adi82
04-04-2009, 12:43
Exhaust centre section / backbox and decat SOLD (cliorod)

FATBOY
06-04-2009, 21:27
alright adi mate, do you still own 0329? just looking back on some old posts..

Adi82
06-04-2009, 22:20
Yep still got it, currently off the road due to failing MOT but intend to get it back up and running very soon.

willyturb0
07-04-2009, 15:12
Cheers Adi. After reading mossyv6's thred in 'pictures' titled Quick DIY refurb of my new willy wheels, i thought i'd have a go. So out with the sanding disks and this is how they look today.

http://i156.photobucket.com/albums/t24/willyturbo/SNV32963.jpg

http://i156.photobucket.com/albums/t24/willyturbo/SNV32964.jpg

They won't win a concours competition, but look good for a trackday set.

All I need now is some 888's!!!

Thanks again.
Dan

mossyv6
07-04-2009, 19:09
^^^^ Good to see my friend, not to difficult is it? Well done :)

Adi82
07-04-2009, 20:11
Good work Dan they look excellent. Definately get some 888's well worth it.