PDA

View Full Version : Strange vibration when turning left



16v_paddy
16-03-2009, 20:01
Right, here's a conundrum for you all :roll:

I've got a very strange vibration that I can feel through the steering wheel when turning left at speeds above 20-30 mph :? - like exiting roundabouts

It's a bit less apparent at about 70-80 mph but still there and it's only when I'm turning the wheel left I can feel the vibration

any ideas :?:

col
16-03-2009, 20:21
Drivers side wheel bearing,? or drive shaft.

LEIGH-ANNE
16-03-2009, 21:06
Wheel bearing!

16v_paddy
16-03-2009, 21:34
Would seem to be the wheel bearing :roll:

The one thats only had 7 months use as well :evil:

LEIGH-ANNE
16-03-2009, 21:42
Must have been fitted wrong Lee :wink:

16v_paddy
16-03-2009, 22:04
Not my fault :roll:

took a spare hub to my m8's garage & got him to fit the bearing :roll: that bastard owes me that pint back :evil: and a go on his mrs for the inconvenience :twisted:

LEIGH-ANNE
16-03-2009, 22:15
Only fairs!

Erm, i have a spare, duno how much they are? Brand new

16v_paddy
16-03-2009, 22:44
so what happens if that 1 fails? :wink: :lol:

LEIGH-ANNE
16-03-2009, 22:44
Have a go anyway :wink:

webby
16-03-2009, 22:45
so what happens if that 1 fails? :wink: :lol:

haha then u get to give leigh-anne's better half 1 =p

16v_paddy
16-03-2009, 22:48
so what happens if that 1 fails? :wink: :lol:

haha then u get to give leigh-anne's better half 1 =p

could be the 1st time in history when a broken wheel bearing literally is a pain in the arse :lol:

webby
16-03-2009, 22:50
naaa there is defo some weird videos about showin this kinda stuff its not a first 8-[ not that i know this i just guess

16v_paddy
16-03-2009, 22:56
PMSL!! :rofl:

hill_power_clio
17-03-2009, 19:08
Not my fault :roll:

took a spare hub to my m8's garage & got him to fit the bearing :roll: that B**t**d owes me that pint back :evil: and a go on his mrs for the inconvenience :twisted:

lol i'll tell him you said that lol

Wobba
17-03-2009, 19:18
amusing thread lol

+1

16v_paddy
20-03-2009, 17:07
Right, I've replaced the bearing with an OE 1 from renault into the hub I got from MatBrown

The bearing in the hub I took off was definately ****ed

But I've still got this vibration through the wheel when turning left :x any ideas? :anyone:

cliopete
20-03-2009, 18:35
I had a similar strange vibration on my car on left hand bends that even Jon(2 live) could not identify. It turned out to be the exhaust downpipe hitting the steering rack. Have you done any work on the exhaust recently that could have changed the alignment slightly?
Pete

MatBrown
20-03-2009, 19:55
Right, I've replaced the bearing with an OE 1 from renault into the hub I got from MatBrown

The bearing in the hub I took off was definately f**ked

But I've still got this vibration through the wheel when turning left :x any ideas? :anyone:

CV joint?


Mat.

16v_paddy
20-03-2009, 20:33
pete; had the engine out recently to change clutch & cam belt so the downpipe could be catching the rack, will check that 2moro, thanks m8 :D

Mat - I hope it's not the cv joint :roll: had new OE driveshafts fitted 12 months ago, about the same time I had the hub replaced :cry:

Zek
22-03-2009, 11:07
I had this same prob a while back cant remember if it was the r5t or the willy but there pretty much the same, and sorry to say this but it could be the drive shaft , it was the short ones outer cv joint for me, stick the front on stands (i had mine under the front arms so it was as if it was on the ground) leave wheels on start it and stick it in 1 gear and let it idle then get someone to turn the steering while you watch the drive shaft, when the the car was going strait the shafts were fine but as the steering was turned the shaft would start to wobble up and down, worth a try anyway.

16v_paddy
22-03-2009, 19:17
:goodposting: thanks, will give that a whirl when I'm off

What would cause a new genuine driveshaft to be fooked after 20k? Or am I just unlucky? :roll:

LEIGH-ANNE
22-03-2009, 19:34
Shit driving skills? :wink:

16v_paddy
22-03-2009, 20:02
:banned:





:lol:

col
22-03-2009, 20:21
you could try puttin full lock on an with it stationary engine on an rock it on the clutch.

if f...d you should hear it knockin :wink: