PDA

View Full Version : Huge appetite for wheel bearings??


glyn211269
03-03-2009, 20:19
When I bought my Willy1 last year it drove perfectly, yet a week later a front wheel bearing went from running bob on to self destruction in the space of 40 miles..... and shagged out the diff bearing into the bargain :-(
So new bearings fitted all round as a precaution and a new box. Not 300 miles later and the vibrating rumbling starts again. What a surprise, front wheel bearings again!

Can anyone shed any light on why my Willy eats front wheel bearings for breakfast??
Flash Arghhh
03-03-2009, 20:29
Camber? would think they would be strong enough to be honest.
Justin..
03-03-2009, 20:38
tried genuine bearings?

Williams dont run camber so that wont be a cause for destruction
Flash Arghhh
03-03-2009, 20:41
Might have uprated top mounts and coil overs :P hehe thats me out if not.
MatBrown
03-03-2009, 20:42
Did you use genuine bearings?


Mat.
MAXIBOY
03-03-2009, 20:59
either there fitted wrong or the hubs are damaged ... :?
Justin..
03-03-2009, 21:10
yeah good point


Try a different garage to fit them
glyn211269
03-03-2009, 21:47
As far as I can see all the suspension looks completely standard like the rest of the car.

However, that's interesting that camber is mentioned as I've always thought that the wheels do lean in more than on a normal car but thought that was normal for a Willy. What is the correct camber angle so I can get it checked?? Is it adjustable on the wishbones then? I cant check as the car is at the garage (a different one that fitted the last bearings tho)

I also don't believe it was genuine bearings that were fitted last time - is there much difference in quality and price between pattern bearings and genuine Renault?
Justin..
03-03-2009, 21:48
Camber is non adjustable, unless you buy camber adjusting bolts.


OE - aftermarket quality does vary, even tho it shouldnt !
MatBrown
03-03-2009, 22:48
My advice would be to fit genuine ones.


Mat.
cliokiz
04-03-2009, 19:02
Maybe it's got valver shocks on if it's running some camber?
white16valver
04-03-2009, 20:38
You'd have serious camber with valver shocks, wouldn't you? lol

Is a possible though :)
clio-patra
04-03-2009, 22:24
Garage anit pressing them in well enough...
Wobba
05-03-2009, 17:44
Garage anit pressing them in well enough...

This is what I would think. Maybe they have a YOP trainee doing it?