check out my rust... [Archive]

rob-legend

02-03-2009, 00:46

...

http://i292.photobucket.com/albums/mm6/rob-legend/01032009103.jpg

http://i292.photobucket.com/albums/mm6/rob-legend/01032009104.jpg

http://i292.photobucket.com/albums/mm6/rob-legend/01032009105.jpg

http://i292.photobucket.com/albums/mm6/rob-legend/01032009110.jpg

:(

is that one behind the headlight a hard one to patch up?

MatrixGuy

02-03-2009, 13:48

That doesn't look too bad mate, you should see mine! :shock:

talkingfish

02-03-2009, 18:04

take the front bumper off and undo the bolts that hold the plastic front wing on and you'll find a whole lot more.... I replaced my front arch liners last year - thought it would be a quick job - the more you do, the more you'll find....

katbloke

02-03-2009, 18:47

scrape off the seam sealer wire brush and drill back to shiney, apply some deox c or whatever its called then etch wzxoyl kind of stuff job done

rob-legend

02-03-2009, 19:44

take the front bumper off and undo the bolts that hold the plastic front wing on and you'll find a whole lot more.... I replaced my front arch liners last year - thought it would be a quick job - the more you do, the more you'll find....

did that, wasn't to bad, the subframe has been eaten by tin worm like

:roll:

katbloke, cheers mate, will do just that! :D

col

02-03-2009, 20:46

Think yourself lucky you dont have a FORD..........alkersaltzer panels!! :)

rob-legend

03-03-2009, 00:06

my mates got a capri, i've seen nothing like it when it comes to bodywork!