PDA

View Full Version : Megane F7R & everything to rebuild it



16v_paddy
28-02-2009, 15:55
Time to get rid of my meggy lump as I'm not rebuilding it any more.

http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2282.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2227.jpg

I didn't take any pics of the rest of the bits :oops: but I've got the whole engine minus a few nuts & bolts that had to be destroyed to remove them :twisted: and the ecu
I've had the bores and the crank measured, the bores are standard size and the crank doesn't need a regrind. The guy who measured it for me estimates the mileage to be around the 80-100k mark.

I'll throw the engine stand as well £250 ono

Now the rebuild bits, I bought all of this stuff from stan @ APD, so not cheap & nasty shite :wink:

F7R head gasket set £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2446.jpg

Bottom end gasket set £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2445.jpg

head bolts £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2447.jpg

crank main bearings £50 ono
big end bearings £60 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2448.jpg

thrust washers £30
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2440.jpg

Wossner forged low compression pistons :twisted: £350 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2442.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2443.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2454.jpg

Forged H-beam Con Rods & ARP bolts - Standard F7R big end shells needed to fit these as they have the tabs £250 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2327.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2328.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2463.jpg

Evogone
28-02-2009, 18:08
Lox compression pistone, is it for a turbo build. ??

16v_paddy
28-02-2009, 19:39
Lox compression pistone, is it for a turbo build. ??

Yes

I've also been reliably informed that the pistons are also ideal for a supercharged F4R as well

16v_paddy
28-02-2009, 20:29
The con rods are now sold

schakal
01-03-2009, 00:02
why are the head bolts and gasket kits so expensive .
anything special with them ?

16v_paddy
01-03-2009, 04:13
I'm just going from what stan charged me & knocking a few quid off that

16v_paddy
10-03-2009, 20:29
Still for sale guys :anyone:

col
10-03-2009, 20:50
Hi Paddy, i need an engine for a kit car i take its complete an std.......has it got ecu?

16v_paddy
10-03-2009, 23:21
It's in bits as in the pics :wink: but everything is there apart from a few nuts that had to be cut/smashed/drilled off :roll: as well as the new bits

got the ecu as well, the head needs tappets as I've thrown the old ones away & already sold the new ones I got

if it's any good to you, make me an offer as I haven't had much interest :cry: and it all needs to go

cliokiz
11-03-2009, 01:10
If you're looking to buy it i've got two spare sets (32) of tappets if you need some.

col
11-03-2009, 22:31
Hi Paddy,give me your bottom book price....pm if you wish


kiz if i do deal with paddy youll be next port of call cheers guys!

16v_paddy
11-03-2009, 22:46
PM'd mate :wink: