16v_paddy
28-02-2009, 15:55
Time to get rid of my meggy lump as I'm not rebuilding it any more.
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2282.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2227.jpg
I didn't take any pics of the rest of the bits :oops: but I've got the whole engine minus a few nuts & bolts that had to be destroyed to remove them :twisted: and the ecu
I've had the bores and the crank measured, the bores are standard size and the crank doesn't need a regrind. The guy who measured it for me estimates the mileage to be around the 80-100k mark.
I'll throw the engine stand as well £250 ono
Now the rebuild bits, I bought all of this stuff from stan @ APD, so not cheap & nasty shite :wink:
F7R head gasket set £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2446.jpg
Bottom end gasket set £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2445.jpg
head bolts £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2447.jpg
crank main bearings £50 ono
big end bearings £60 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2448.jpg
thrust washers £30
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2440.jpg
Wossner forged low compression pistons :twisted: £350 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2442.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2443.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2454.jpg
Forged H-beam Con Rods & ARP bolts - Standard F7R big end shells needed to fit these as they have the tabs £250 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2327.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2328.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2463.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2282.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2227.jpg
I didn't take any pics of the rest of the bits :oops: but I've got the whole engine minus a few nuts & bolts that had to be destroyed to remove them :twisted: and the ecu
I've had the bores and the crank measured, the bores are standard size and the crank doesn't need a regrind. The guy who measured it for me estimates the mileage to be around the 80-100k mark.
I'll throw the engine stand as well £250 ono
Now the rebuild bits, I bought all of this stuff from stan @ APD, so not cheap & nasty shite :wink:
F7R head gasket set £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2446.jpg
Bottom end gasket set £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2445.jpg
head bolts £50 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2447.jpg
crank main bearings £50 ono
big end bearings £60 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2448.jpg
thrust washers £30
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2440.jpg
Wossner forged low compression pistons :twisted: £350 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2442.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2443.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2454.jpg
Forged H-beam Con Rods & ARP bolts - Standard F7R big end shells needed to fit these as they have the tabs £250 ono
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2327.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2328.jpg
http://i444.photobucket.com/albums/qq165/16v_paddy/Rebuild%20project/IMG_2463.jpg