View Full Version : What speed does your car hit the limiter ?
my car hits the limiter at 134mph @ 6400RPM - is this about right ?
john
Jabba the...
04-07-2005, 11:36
hittin it at 7000 sounds better :wink:
6500.....higher when its fully warmed up... 6700-6800 :twisted:
2nd no idea
83 in 3rd
110 in 4th
all at 6500 - 6600 rpm
Mark_Ritchspeed
04-07-2005, 13:00
At about 125mph at 7300 rpm.
are you on the valver ecu mark or are you running a custom piggyback chip? never did find out ?
Mark_Ritchspeed
04-07-2005, 13:34
Willy ecu with Hillpower chip.
1st about 40 mph
2nd about 65 mph
3rd about 95
4th about 115
5th off the clock
just for the record...2lives car has been remapped to a rev limit of 7200rpm
Andyvalver
04-07-2005, 14:47
1st 40mph
2nd 62mph
3rd 90mph
4th 110 mph
5th ?
Chris n`nic
04-07-2005, 15:21
My cup does:
1st 40
2nd 68
3rd 95 (7800 rpm)
4th 125 (8000rpm)
5th 142+
Chris
1st 40mph
2nd 60mph
3rd 90mph
4th 110 /115 mph
5th ???
had it to 130 in 5th last night, racing a celica but i still had about 1200 rpm to go, so probably about 135 ish
was with a semi full car and summy in aswell, and running a crap inducution kit with no air feeds, so i think i should be able to do a little better :)
my car hits the limiter at 134mph @ 6400RPM - is this about right ?
john
Yes, the nana was the same before I had the revs upped...
Smokey McPot
04-07-2005, 18:07
GPS says 137.....rev counter 6500ish
137 gps!? What does the speedo read? both my clios are reading 6.5k at around 135 on the clocks.. :?
1st- ??
2nd- 56ish
3rd- 82ish
4th-104ish
5th- had it showing 138 on clock
thats at std limiter 6500, but seems to go to 6700-6800 once fully warmed up! not really tryd at that yet
Slithers
04-07-2005, 19:10
I heard that the phase 1 valvers have a higher rev limit than all the other williams/valvers around, summit to do with usin a reno 19 ecu.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.