PDA

View Full Version : Williams Unsilenced De-Cat pipes (New)



cliorod
23-02-2009, 19:20
http://i67.photobucket.com/albums/h305/Cliorod/IMG_0703.jpg

I have finally got a price for someone to manufacture these as the one shown.
It is obviously a used one,and the picture is just to show what is what.

I have been quoted £30 plus delivery for brand new ones,made in steel (not stainless).

Whilst he will "jig up" for the Williams,I am sure the flanges are the same for the valver,and it would just be a case of welding the flanges on to suit.I have not got a valver de-cat,so I would need to borrow one to ensure a 100% correct it.
These will be a straightforward bolt on/bolt off fitting :wink:

Anyone intrested please get in touch,or if you have any questions

Rod

katbloke
23-02-2009, 19:38
valver flanges are at a different position to the williams ones, well the one that mounts to the downpipe anyways

MatBrown
23-02-2009, 22:13
The williams front flange has a bigger bore too.


Mat.

cliorod
23-02-2009, 22:34
Thanks for that guys

I guess they are just for the Williams then ~~ as per the example :wink: :wink:

I knew the flanges were at different angles but thought they were the same size :oops: :oops:

MatBrown
23-02-2009, 23:31
Could probably get away with it.
Just couldn't put a 16v flange on a willy downpipe.


Mat.

Coops
24-02-2009, 15:05
mm flange





sorry :oops:

cliokiz
25-02-2009, 02:00
Doesn't the willy downpipe have a lip, also?

Why isn't the decat pipe the same bore all the way through?

cliorod
25-02-2009, 08:06
I'm not 100% sure ~~ As I bought this of ebay :wink: :wink:
I can only think,the smaller diameter is to match up with the flange on the exhaust system.The bigger diameter mates up to the down pipe.

cliokiz
25-02-2009, 14:35
My valver decat is a large bore all the way through and much larger than the downpipe bore without any issues, so you might be better off getting pipes made up with the same (larger) bore all the way through.

eternalife
25-02-2009, 18:11
Williams DP has a lip which slots into CAT.
Reduced bore - only decat i seen it on, was my devil decat.
Devil exhaust systems have a smaller bore.