View Full Version : Will this sill fit?
http://www.nicedeals.co.uk/product_info.php?cPath=1_230_508&products_id=3434&osCsid=086cb1a2c969c931d60cc10cc559d610
May need to replace mine.
16v_paddy
17-02-2009, 20:34
Should do
The guy who done mine didn't use the whole thing, he just chopped all the crap + a bit more away then chopped & welded the new one accordingly
Ok, so it would mean chopping it up a bit I guess. I'll see what I can do.
Cheers!
white16valver
17-02-2009, 21:02
That place seems very cheap :shock:
Are they all new parts??
I've bought parts from here before fella..
http://www.beeversautopanels.co.uk/
Quick delivery - couldn't be arsed finding the costs of the sills :lol:
FlamingMonkey
17-02-2009, 22:10
hehe beevers
it wont fit as its totally differant.
Ive done sills before and tbh i would always use a sheet of steel and make my own rather than trying to get a 1.2 to fit.
The williams arch flairs out - the 1.2 doesnt
HOWEVER - if your doing the sills from the back of the door forwards a 1.2 arch is ideal!
A body shop will be able to sort yours but it will get worse once u start digging.....really worse lol
Mark One
18-02-2009, 14:42
so what comes attached to the sill then? I'd have thought it wouldnt make a difference whether the car had flared arches or not??
Don't the arches only flare out from the sill, not the sill itself that's flared?
no the sill flairs out from the door back
I've noticed you're posting a bit more regularly again Northy :)
Sadly, it's just the rear sill that needed doing. I have had it patch welded now, and tbh it's a good job and you can't really see it. I will leave it as is until I think about having the arches done, there's about 5mm of rust starting to come through now.
eye mate, every night now without fail
white16valver
20-02-2009, 14:02
8)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.