PDA

View Full Version : Failed MOT.......



Coops
30-01-2009, 00:38
.......

001 Offside side repeater not in good working order (not working) [1.5.A1b]

002 Offside front headlamp aim is too low [1.6]

hardest 2 mins work ever had to do for another 12 months boosting babay, olay!

Wobba
30-01-2009, 01:19
.......

001 Offside side repeater not in good working order (not working) [1.5.A1b]

002 Offside front headlamp aim is too low [1.6]

hardest 2 mins work ever had to do for another 12 months boosting babay, olay!

Not bad! I aim to get a clean sheet with just their advisories on being lowered and a bit stripped :)

16v_paddy
30-01-2009, 11:30
:groupwave: :groupwave: :groupwave:

I got a clean sheet this time round :D

J o n
30-01-2009, 11:32
I was amazed that mine only failed on the handbrake... 11% efficiency! Get in!

Coops
30-01-2009, 12:19
wasnt as good as last year, only an advisory for no rear seatbelts

J o n
30-01-2009, 12:43
tbh this was the first one it's failed but I kinda knew it would, wanted to see what on, so was a bonus when it was only something simple.

Wobba
30-01-2009, 14:29
My MOT is very soon, and I have a slight locking rear brake I have to sort first, along with a petrol leak and refitting CAT.

Fixed horns, bonnet catch, rear fog light already though.

Guess they will have to get me on headlight adjustment.

white16valver
30-01-2009, 19:37
You might be alright without a Cat - TBH mine smells so rich out the back on start up and even idling after a drive, I think mine's doing **** all LoL :lol: and mine always gets through that part of the test! :)

Just make sure the car's really hot from a good drive to the testing station ;)

Jamie.
30-01-2009, 19:43
Wow and it didnt break all the way there and back?

Impressive. :wink:

richy
30-01-2009, 19:46
never had one of mine fail :wink:

Jamie.
30-01-2009, 19:49
never had one of mine fail :wink:


Bending the rules does not count.

richy
30-01-2009, 19:56
i dont bend the rules, im not a mot tester and never have been lol :wink:

Coops
30-01-2009, 20:44
ai, its his mate that bends the rules for him eh rich :wink: :P

richy
30-01-2009, 21:15
:lol: no no no, my cars are always spot on :wink:

ThRaXaIR
30-01-2009, 22:49
mine failed today, binding rear disc cos turns out my black diamond discs on the rear are defective and dont hold the bearing in. awesome! :roll:

something about sensors too but as it stuck in the garage till i get new discs i havent seen the sheet.

LEIGH-ANNE
03-02-2009, 23:50
My MOT is very soon, and I have a slight locking rear brake I have to sort first, along with a petrol leak and refitting CAT.

Fixed horns, bonnet catch, rear fog light already though.

Guess they will have to get me on headlight adjustment.

My adjustments are wrong.....ill blame the person who put em in :wink: