problem with k-tec 285mm big breaks

[paudi294]

has any one had these the 4pot ones and had any problems with them as my disc wint fit over the hubs

cheers

[Matt_16v]

I have the NON 4 pot brake kit.. The one which uses std calipers, that is 285 and went over the hubs fine. I would assume that they would use the same discs?

Matt

[Jamie.]

I would say you have the wrong discs as I had that big brake kit and it went on fine and dandy.

[paudi294]

ok cheers lads i sure i ordered the right ones they must have cocked up wouldnt b the 1st time they have lol, ill have to get hold of them

cheers

[Jamie.]

They sent me the wrong discs first time - the holes to the hub didnt match up but they were 99% correct. Seems odd they sent you discs which were that far wrong.... Your not doing somehting silly are you?

[paudi294]

no m8 def i messured the hole in the middle up againts the org disc and ther 3mm smaller then the org 1s and the bolt holes r slightly out. and tryed other hubs still no good.

[Mark One]

the discs are meant to be off a Renault 21 2.0 non-turbo. 285mm, chassis L48Y I think