PDA

View Full Version : williams 2 ecu


schakal
19-12-2008, 18:20
has it got the immobiliser issue ?
if so is there an easy way to make it work on a 2litre b/e +1.8 head hybrid ?
MatBrown
19-12-2008, 19:03
Nope, no williams ecu has an immobiliser.


Mat.
schakal
19-12-2008, 21:59
Nope, no williams ecu has an immobiliser.


Mat.

thanks mat 8)

:matbrown:
Robb
19-12-2008, 23:16
running one on mine with that combo no problems
schakal
19-12-2008, 23:21
running one on mine with that combo no problems

how long have you been running it mate ?
have you ever been on a dyno with that setup to see
what the power /torque figures are ?
number1
19-12-2008, 23:35
Ive got a gunnerchipped Willy 2 Ecu on my hybrid, Working with a ported valver head and megane bottom end, full mongoose, decat and green panel filter i had 140 atw which was apparently 170 fly,
Runs Sweet as a nut!
Cant wait to see what its putting out now i have the supersprint on,
Robb
20-12-2008, 09:39
It made bad results im afraid. Over fueling badly heres the dyno picture.... I've been running it for probably 8 month now. My valver ECU is faster than my williams though and im going back to using that. It just has a lot more mid range grunt with the valver ECU.

Power is 130hp (very disapointing) He said im loosing about 15HP by over fueling

Torque is about 135Lbs

Big ish picture...

http://xfionline.co.uk/gallery/gallery2/d/553-1/rrgraph.jpg
schakal
20-12-2008, 11:58
running one on mine with that combo no problems


It made bad results im afraid. Over fueling badly heres the dyno picture.... I've been running it for probably 8 month now. My valver ECU is faster than my williams though and im going back to using that. It just has a lot more mid range grunt with the valver ECU.

Power is 130hp (very disapointing) He said im loosing about 15HP by over fueling

Torque is about 135Lbs

Big ish picture...


i dont understand how running worse than a f7p is classed
as "no problems" ?? :?
sounds totally opposite to me !!
Mr.AdamB
20-12-2008, 12:58
still has much more tourque that an f7p lol,
feuling is way out!!! AFR should look something like this.

my graph after remap @ RS tuning.
http://img528.imageshack.us/img528/1049/img027mediumuc5.jpg
schakal
20-12-2008, 16:01
Ive got a gunnerchipped Willy 2 Ecu on my hybrid, Working with a ported valver head and megane bottom end, full mongoose, decat and green panel filter i had 140 atw which was apparently 170 fly,
Runs Sweet as a nut!
Cant wait to see what its putting out now i have the supersprint on,

please do tell more :P
whats the fuel consumption like ? hows the idle quality ?


i have a meggy b/e and a 16v head here ,porting should not be
a lot of problem . all i shall need is a gunner chip but i heard
there are different variations in them .
how do i find the right one ? :roll:
Robb
20-12-2008, 20:43
Haha, ok i suppose it has some problems but they arent running problems really, idle is fine etc etc it hasnt blown up :lol:
schakal
20-12-2008, 22:48
Ive got a gunnerchipped Willy 2 Ecu on my hybrid

is there any difference between valver and willy ecus when
both are gunner chipped ?? :?: