PDA

View Full Version : blower broken.,.,.



greggbradenuk
16-12-2008, 14:44
hello...

My blower went this morning...VERY annoying and COLD!! I've looked in thte fuse box nut the fuses don't seem to be labelled - any idea which one I should check? If it's not that any ideas where I should look next?

Cheers

Gregg

LEIGH-ANNE
16-12-2008, 14:45
Do u have coolant in ur tank?

greggbradenuk
16-12-2008, 15:05
can that stop the heater fan working then? I'll check tonight.

LEIGH-ANNE
16-12-2008, 15:13
I should have asked first whether it doesnt work at all or if it just blows out cold air?? If it blows out cold air then its likely there may not be any coolant in ur header tank...

Or it could be ur heater matrix which i beleive is a fiddly job!! :cry:

greggbradenuk
16-12-2008, 15:28
ahhh I see. There's no air at all... I hope it's a fuse then!! I don't fancy replacing the matrix....

LEIGH-ANNE
16-12-2008, 15:37
oh dear!!!

Well the fuse i believe is the 9th along....i have a 20 amp in mine! And mine is nice and toasty......sorry ( :wink: )

Wobba
16-12-2008, 16:24
Either that or it is the relays in the heater blower itself. It's like a square plug thing with elements in it that allows you to use the 3 variable speeds on the fan.

It's easy to source one and replace it though, just a pain in the arse at this time of year. I just got a whole motor with the relays attached, took off skuttle panel and wipers, gave the whole skuttle area a really good clean and even hoovered it, replace dead fan motor, fixed wipers, refurbished skuttle panel, job done.

col
16-12-2008, 19:28
Ive just replaced the brushes in my merc heater motor, did the trick. :wink:

16v_paddy
16-12-2008, 20:08
I've got a spare blower that works if you need it m8 :wink: