PDA

View Full Version : Dashboard screw help; please help before i go insane!



MatrixGuy
11-12-2008, 17:49
Does anyone know the length/type of the 3 screws holding the plastic piece under the steering wheel?

Mine has been taken off in the past and never but back on right as there is a gap..... it's really bugging me! :x

If know one understands what i mean i will take a photo, lol.

Cheers

Iain

LEIGH-ANNE
11-12-2008, 19:42
The plastic piece that goes around the bonnet pull?

Its a torx screw :roll: and its about a cm long...

If thats the one ur on about.....mind u they are all torx screws....just different lengths.. :wink:

Wobba
11-12-2008, 20:36
The cowling that has an upper and lower part? The lower half is screwed in by standard common torx screws probably the same as the ones Leighleigh mentioned. The middle one fits in a recess underneath.

They can become threaded very easily as they are plastic surrounds, so you may have to get inventive with some plumbers tape stuff or silicone and screw them in, lots of ways.

MatrixGuy
11-12-2008, 22:52
Hmmm, not sure we are the same part, lol!

I will post a photo tommorrow. :)

Its the part below and to the left of the ignition.