rear 1/4 panels or arch sections ????

[dannyboy3767]

hey lads where would i get rear 1/4 panel sections, the arches on my willy 3 are past repair. Im in ireland so getting parts is nearly im possible. Would renault be able to get them. please help

[16v_paddy]

Stay away from Renault :shock: £385 + VAT each last time I asked

You want to search for repair panels :wink: much cheaper and you just need someone who's good to chop out the rust & weld the new bits on

Have alook at my thread :wink: http://www.williamsclio.co.uk/forum/viewtopic.php?t=32143

If you look at one of the pics of the rear qtr you can see whats been chopped away, you don't need the whole panel, you just chop what you need off the repair panel & weld it in

[dannyboy3767]

Hi paddy thanks for the reply, Im a panel beater so im doing all the work myself. Have you any idea where id get the repair panels

[cliorod]

Dannyboy 3637

http://www.beeversautopanels.co.uk/



Hi try these guys.I got an near side rear repair panel :lol: :wink: ~~ NOT for the valver/Williams, :cry: :( but it had the correct shape etc etc .with enough metal on to graft onto the car.I orderd it Monday and it was delivered Tuesday.
It was that "Rovers" fan DAZ who put me onto them.I think the total delivered was under £30.

With your panel beating skills,it should a doddle :lol: :cry:

[richy]

i got one from there aswell rod, its for a 1.2 etc so not flared but easy enough for a bodyshop to use the sections they need etc

[Mark One]

think theres cash to be made by someone who would sell valver/willy rear quarters.

[16v_paddy]

:? I thought you might know better than me, bein in the trade :?

Done a search on google & found this
http://www.crashrepairparts.com/panels-lamps/parts/markid/623/renault_clio_1990_1996?prs=7b2c899a2ddc23e0b7352cd 830dea91e

:shock: just noticed how cheap they are as well :shock:

[dannyboy3767]

like i said being from ireland is the problem, cant get anything here for the williams or the valvers because they wernt sold here. I think id be able to cut out the section off an ordinary 1.2 clio and weld it in. be alot handier if i had new ones though.

[dannyboy3767]

Thanks for that site, Thats exactly what i need, ive been searching google for ages trying to find them repair sections. :D :D :D

[katbloke]

http://cgi.ebay.co.uk/Rear-Wheel-Arch-3-Door-RENAULT-CLIO-1990-1996_W0QQitemZ140280186328QQcmdZViewItemQQptZUK_Ca rsParts_Vehicles_CarParts_SM?hash=item140280186328&_trksid=p3286.c0.m14&_trkparms=72%3A1301%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318

[Daz.]

Dannyboy 3637

http://www.beeversautopanels.co.uk/



Hi try these guys.I got an near side rear repair panel :lol: :wink: ~~ NOT for the valver/Williams, :cry: :( but it had the correct shape etc etc .with enough metal on to graft onto the car.I orderd it Monday and it was delivered Tuesday.
It was that "Rovers" fan DAZ who put me onto them.I think the total delivered was under £30.

With your panel beating skills,it should a doddle :lol: :cry:

yup got both sides on the car now as well as the fuel filler, if you have just lip issues then the panels are pretty much spot on, its further up the arch where it begins to flare - if your doing the petrol cap its a bit more involved, I had to take the car back to get it resmoothed as the flare falls away towards the crease in the arch where the replacements don't..

You should have no problems with them though :D