View Full Version : Electronics help, broken old skool immobiliser
Lathafummi
29-11-2008, 18:45
My car has a "Autoblock Immobiliser" the problem is the socket is old and a pin has just snapped off. I have a search on Google but not yet found anything. I just need a new socket any body have any ideas?
MatBrown
29-11-2008, 18:56
Probably easier to just trace the wires back and remove the immobiliser completely as i would have thought they were all coded differently.
Mat.
Lathafummi
29-11-2008, 19:19
The key is fine is just the connector. If you short the wire to the key it starts fine but having a immoboliser in bits hanging from the dash is not a good look...
best bet is rip out and get new alarm/imobiliser system(obviously its all £££££££££££££££££££) or just get a new immobiliser???
Lathafummi
05-12-2008, 18:45
Found it :D
http://i23.photobucket.com/albums/b387/Lathafummi/vim01-skt_large.jpg
£8.32 not to bad, no mention of Autoblock though but its the right one
nice one! always nice to bag a bargain!!!
bbaazz-08
12-12-2008, 21:29
where did u find it?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.