PDA

View Full Version : Print outs



neme
29-06-2005, 10:58
Be interested to see peoples r/r printouts with mod list . Handy to see what sort of figures are from certain mods. heres mine any way

http://i23.photobucket.com/albums/b374/neme16v/54eb4193.jpg

thats with K+N and scorpion full system. not bad for a supposed valver :wink:

look at my poor torque dip :? However im sure i would feel that dip in the driving ? but it pulls all the way? Two weeks after this it had new fuel pump , service and cam belt changed.would a knackered fuel pump cause that loss of torque?

steve.

Rudders16v
29-06-2005, 11:01
Hmm, heard some not so good things about that companies r/r, lot of local people wont use them

neme
29-06-2005, 11:06
Really ? well this was done by previous owner . Will have to see my mate at LPS for an after hours run then wont i :D

Swervin_Mervin
29-06-2005, 11:07
Most RR companies have an axe to grind IMO.

I have 2 printouts. One came with the car and showed the K&N equipped motor kicking out 138bhp IIRC. The ITG equipped one I got from RE showed it kicking out 130 IIRC.

FlamingMonkey
29-06-2005, 11:17
I've had 2 printout from RE and one from the mini sport place, all three differ, 137 ATW first time, 131 ATW 2nd time, 121 ATW 3rd time, same car same mods.

Swervin_Mervin
29-06-2005, 11:19
Reaching for under 100 there FM? :wink:

KingStromba
29-06-2005, 11:19
My car made an unconfirmed 154 BHP atw unofficially on my home made non calibrated rollers.

Piper
29-06-2005, 11:20
Standard :D

http://i2.photobucket.com/albums/y4/Pipertron/piper3.jpg

northy
29-06-2005, 13:07
ive done a seperate posts only for rr results.


http://www.williamsclio.co.uk/forum/viewtopic.php?t=3797&highlight=

neme
29-06-2005, 13:12
oops just found that sticky

Martin
29-06-2005, 13:31
My car made an unconfirmed 154 BHP atw unofficially on my home made non calibrated rollers.
:roll:

Lunner
29-06-2005, 14:42
My car made an unconfirmed 154 BHP atw unofficially on my home made non calibrated rollers.

Two bits of pipe side by side attached to a coil don't count ;)