wilwoods

[lewis_willy2]

alrite guys i need a favour.

it invloves wilwoods and their brackets and a pen and paper (or autocad)!

im getting some calipers but need some brackets made, but to make my life easier could someone please draw around their brackets and send me the pics. with measurements would good.

im assuming most people on here will have already fitted theirs so im not asking for you to go remove em but if anyone has some brackets lying around it would be most apprecited.

cheers

lewis

[arj256]

Just to let people know, there are two different types of Wilwood Dynalite brackets floating about.

The one which came with the original group buy. Which uses the normal 120-6805 caliper.
This isnt a true 120-6805 it is in fact a 120-6806 specification.

And the newer 120-6805 which is made for the 120-6805.

[lewis_willy2]

someone could earn a few quid if they can do this for me?

[Mark One]

also interested in this, but was going to buy a spare hub and get it measured up in a vice.

[lewis_willy2]

im just gonna do some guesstimations until i get it right.

[lewis_willy2]

common guys?

[eternalife]

common guys?

What model caliper are you getting?
If I have understoon arj256's post correctly :wink: ...then you should get the 120 6806 specification caliper.

If its the same as the one's in the group buy section I am pretty sure the person/s running the group buy could get you the brackets made up.

Best bet imo is to buy from the group buy and take the hassle out of making the brackets yourself.
Otherwise, model of caliper would need to be known before anyone could offer any solid advice imo.

[lewis_willy2]

the thing is i could knock some brackets up in half a day with a good old file. hence the reason for not wanting to pay over the top for some brackets.

i dont like paying out for something im capable of doing. its not that im tight but i like doing things myself. sense of achievement and all that.