View Full Version : WILLIAMS 3 BLEEDING BRAKE
garymar1983
31-10-2008, 12:40
Any tips for bleeding brakes on williams 3 with abs?
leave ignition off pressure bleed?
franksvalver
31-10-2008, 18:53
I did mine with engine running and turned off. Just go overboard and double double check imo
There a wanker.
Bleed as much as you can, get the car on some grass and lock it up. This will help fire most of the air from the pump. Then re-bleed. This may take 2 or 3 times to complete!
Done it the other day, took me approx an hour to do 3 times.
you can buy a suction pump type bleeding tool from accesory shops.
works like a syringe...
another way is to use a washer motor and push the fluid up through the master cylinder..
garymar1983
03-11-2008, 12:23
ive still not got it right yet!
gonne try pressure bleed!
grrr :twisted:
buy a eazybleed mate then a piece of cake
and make sure u start with the furthist away from the master cylinder
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.