View Full Version : KTR FAST ROAD FRONT BRAKE KIT
Theses come off a Mk1 1.2 R reg. But I believe they will fit the whole mk1 Range from 1.2 to RSI
They are used but i checked the disks over and they have no Marks / Indents in them at all.
The Pads have around 1.5 CM of pad.
http://www.k-tecracing.com/products/clio1/brakes/c1_froad_frbr_1.jpg
BristolSam16v
22-10-2008, 20:35
price? also the one on the left looks like the middle bit is higher than the middle bit on the right disc :S
stevie_b
22-10-2008, 22:45
I think that is probably a pic off the K-tec site? The one on the right is a vented front, 259mm probably, whilst the one on the left is then 238mm rear, non-vented?
stevie_b
22-10-2008, 22:47
Actually, looking again...
One on the left does not look right to be a Mk 1 Clio rear either (nowhere for the bearing to mount into), but it does look non-vented and so is completely different to the one on the right!
Justin..
22-10-2008, 23:21
Its just a promo pic of off K-tiec's site. The left disc is solid, the right is vented.
katbloke
23-10-2008, 09:09
plus they are fronts so you wouldnt have anywhere for bearing to press into
Oppps. The ones i'm selling are two solid fronts.
So to comfirm theses are the Solid Type that will fit 1.1, 1.2, 1.4
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.