PDA

View Full Version : KTR FAST ROAD FRONT BRAKE KIT


rob_887
22-10-2008, 20:07
Theses come off a Mk1 1.2 R reg. But I believe they will fit the whole mk1 Range from 1.2 to RSI
They are used but i checked the disks over and they have no Marks / Indents in them at all.
The Pads have around 1.5 CM of pad.
http://www.k-tecracing.com/products/clio1/brakes/c1_froad_frbr_1.jpg
rob_887
22-10-2008, 20:09
:)
BristolSam16v
22-10-2008, 20:35
price? also the one on the left looks like the middle bit is higher than the middle bit on the right disc :S
stevie_b
22-10-2008, 22:45
I think that is probably a pic off the K-tec site? The one on the right is a vented front, 259mm probably, whilst the one on the left is then 238mm rear, non-vented?
stevie_b
22-10-2008, 22:47
Actually, looking again...

One on the left does not look right to be a Mk 1 Clio rear either (nowhere for the bearing to mount into), but it does look non-vented and so is completely different to the one on the right!
Justin..
22-10-2008, 23:21
Its just a promo pic of off K-tiec's site. The left disc is solid, the right is vented.
katbloke
23-10-2008, 09:09
plus they are fronts so you wouldnt have anywhere for bearing to press into
rob_887
23-10-2008, 12:09
Oppps. The ones i'm selling are two solid fronts.
rob_887
23-10-2008, 12:37
So to comfirm theses are the Solid Type that will fit 1.1, 1.2, 1.4