PDA

View Full Version : Fuel gauge / Sender



Evogone
10-10-2008, 17:58
My fuel gauge doesnt seem to work so had a little fiddle with the multi plus at the back of the dash to see if they were all clipped in ok. Seem fine.

I unplugged the sender as in the Haynes manual is states to test the sender you can do it by checking resistance across the terminals. Its varies dependant on how full it is. I have checked this and no reading at all across any comination of pins. Has anyone got a sender that can check to see if you should get something ????

Checked the plug (2 outside pins) and there is 6v should it not be 12 ?