intake F7R / F7P [Archive]

dhay14

08-10-2008, 13:05

are there any differences between a valver intake and the williams intake

was putting my williams engine together a saw that the williams intake had 3 vacuum nipples, and my valver intake had just 2.

is this the right intake i'm using for the williams engine or is this from another engine? is there somewhere on the intake a code where i can check from what engine this piece might be?

dhayrone

Justin..

08-10-2008, 18:39

um i know the 19 and clio ones are different, but i think on the clio the difference would be between ph1 and ph2 16v with willy using the ph2

dhay14

08-10-2008, 19:01

ok...

it fits ok so i think it would be ok then. are there any differences in the inlet ports? are they all the same? or the volume of the intake itself?

Justin..

08-10-2008, 19:02

i doubt theres any performance issues

Wobba

09-10-2008, 02:26

Pretty sure they are the same...not sure why you have 3 vaccum pipe holes though, maybe ABS? Not sure...

dhay14

09-10-2008, 10:03

dont think its abs because my 1.8 engine has 2 vacuumnipples thats the whole thing. ir remains strange

anybody has a picture of a R19 16v inlet mani?

number1

09-10-2008, 19:34

19 16v inlet manifold has an extra long neck on the throttle body end
ive come across a few with an extra vacuum feed, just blank off the one you dont need

Dave

dhay14

09-10-2008, 23:32

tnx mate

think i will use it for the vacuum hose

dhay14

09-10-2008, 23:36

damn edit :evil:

i will use it for tapping off for the boost gauge and BOV