View Full Version : New top mounts
Getting new suspension fitted to the cup racer next week and want to renew the top mounts aswell.
Where the best place to get them and how much.
eternalife
07-10-2008, 10:19
Getting new suspension fitted to the cup racer next week and want to renew the top mounts aswell.
Where the best place to get them and how much.
Reno supply the 'top mount kit' for approx £27
From motorfactor its approx £23.
I personally pay the few extra quid and get Reno OEM item.
Getting new suspension fitted to the cup racer next week and want to renew the top mounts aswell.
Where the best place to get them and how much.
Reno supply the 'top mount kit' for approx £27
From motorfactor its approx £23.
I personally pay the few extra quid and get Reno OEM item.
Are the 16v and williams the same part ? any numbers so to make sure the Renault numptys dont order the wrong one ?
You can get the rubber top mounts from Gsf and they are stamped up as Renault anyway.
And they also sell the bearings to.
If your after a top mount kit with all new nuts top plates etc, then Renault would be the best bet.
You can get the rubber top mounts from Gsf and they are stamped up as Renault anyway.
And they also sell the bearings to.
If your after a top mount kit with all new nuts top plates etc, then Renault would be the best bet.
Part Numbers ??
Ordered 2 of these so should fit my new suspension new week..
7701470089 @ £25.44 each Ex.VAT
Hope these are the correct ones..!
i know its too late now, but i phoned compbrake today as they currently have an ebay listing for 'renault clio top mounts'
and after speaking to a guy there he says the top mounts should fit all clio's mk1 or mk2!
might be useful for someone, i was looking for some aftermarket, uprated top mounts, but i'm leaving the standard ones on now
just passing on information
i know its too late now, but i phoned compbrake today as they currently have an ebay listing for 'renault clio top mounts'
and after speaking to a guy there he says the top mounts should fit all clio's mk1 or mk2!
might be useful for someone, i was looking for some aftermarket, uprated top mounts, but i'm leaving the standard ones on now
just passing on information
The CS lot had some issues with these, dont know if they were fitting them wrong. Will fit the std ones and see what its like.
yeh i was advised by a good friend who fit them not to bother, not worth the extra money in his opinion
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.