View Full Version : Valve lifters.
adam 006
17-09-2008, 17:50
Sorry to be a pain but is there a guide to donig this job on the site which tells me what all the tourque settings of the bolts should be.
thanks for your hepl
dont think there is but a haynes manual should tell you everything you need
adam 006
17-09-2008, 19:08
i do not have a manual sadley.
what you want to know mate
camshaft bearing caps 8mm bolts 24nm
6mm bolts 10nm
camshaft sprocket 50nm
valve cover 3 to 6 nm
adam 006
18-09-2008, 18:04
thanks mate
adam 006
20-09-2008, 23:36
is there any order they should be torqued up in?
middle out iirc
larger then smaller
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.