PDA

View Full Version : Heater blower



shrimperwrx
13-09-2008, 21:32
Hi .... my heater is working but i have no blower control !!!! checked the fuse but still nothing ... any thoughts ?????

MAXIBOY
13-09-2008, 21:46
yes check the connectors in the scuttle panel area

shrimperwrx
19-09-2008, 11:08
Hi ...where are these connectors .....left , right ???? near the jack or over near the expansion bottle ??? cheers

Wobba
19-09-2008, 11:25
If you open the skuttle panel up, in the middle is the heater blower itself. You can see the plugs from the drivers side.

I fitted a 2nd hand blower and sorted this problem. If none of the fan settings work then I suggest you do the same. It's quite simple but I think I had to take the wiper arms out to get it out and the ECU.

When you take it out it gives you a good chance to remove all the crap built up under the skuttle, but mind you dont get loads of dirt down the blower area, or it will blow out into your cabin :D

shrimperwrx
19-09-2008, 20:27
cheers , will give it a go !!!!

shrimperwrx
23-09-2008, 16:59
it was a loose connection.. quick play...back to normal..cheers again

Wobba
24-09-2008, 00:01
lovely!