View Full Version : Can anyone tell me the sizes of...
All the bolts on the outer parts of the engine bay??
Wing bolts, headlight bolts, slam panel bolts, bonnet stay bolts
I had a look on dialogys but to be honest I don't know what I'm looking for and where :oops:
Headlight and slam panel ideally as the wing ones really should be blue but they look shit once they've been off a couple of times!!
Cheers
Daz
busterhymes
12-09-2008, 10:39
think your looking for M6, usually if a 10mm spanner fits it then you can say its M6 but as with everything there are exceptions but easy way round it is take a sample with you to your local fastener stockist :) :)
Well I'd be ordering online so I can't do that really, plus I could do with lengths aswell...
Actually I could get the lengths off mine :D
stevie_b
12-09-2008, 10:53
I know the headlight ones have a 10mm hex head as I just put mine back on the car the other day. Is that any use?
buy a thread guage and a tape measure mate and get measuring, then post up :wink: :wink:
hi mate most of the bolts are pretty standard metric sizes
headlights are M6 x 1.0 i think 20mm maybe 25mm iirc
slam panel are M8 x 1.25 20mm again i think..
wings are a funny thread i think and srew into retaining clips but can be replaced with a nut and bolt and washers...
can get loads of cheap stainless cap headed bolts from screwfix etc
or standard from loads of online places..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.