View Full Version : FSE setup
lewis_willy2
16-08-2008, 22:43
is this correct?
im having problems. i get 4 bar pressure (or what ever i set it to) but it wont start. if i change i around i get no pressure but it will run?
at the mo this is how it is
http://i10.photobucket.com/albums/a126/lewisredfern001/Photo044.jpg
have u blanked off the original return on the fuel rail?
what happens when it runs and u turn the screw?
dont need to blank it off, the adaptor for the fse that bolts to where the o/e reg is on the fuel rail blanks it for you
lewis_willy2
17-08-2008, 13:43
ye the original return is blanked of using a piece of pipe and bolt
i will check getting it running and turning the screw
its not mate, remove the screw and pipe and see what happens.........nothing! the petrol doesnt make it that far as the fse adaptor blanks the return part of the fuel rail itself from the inside :wink:
bass_direct
17-08-2008, 20:55
yeah my return also has nothing on it, and is set up as above, runs fine
Where do you get one of these?
Justin..
18-08-2008, 19:45
got mine on ebay
I need one with the adaptor to fit on the fuelrail..
Justin..
18-08-2008, 20:28
yeah mine came with that
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.