16v 2.2l lol

[Daz.]

http://cgi.ebay.co.uk/1995-RENAULT-CLIO-16V-RED_W0QQitemZ150279276978QQcmdZViewItem?hash=item1 50279276978&_trkparms=39%3A1%7C66%3A2%7C65%3A10&_trksid=p3286.c0.m14.l1318

[rob-legend]

sounds legit 8)

[MAXIBOY]

theres a guy on another forum swears his is 2.2 as well..

[Clio_GTT]

Don't prima sell the pistons for 2.2?

[bill.]

sounds like a crock of shit to me!

[MAXIBOY]

doubtful as you would need to run a 87mm bore to get a proper 2.2 capacity..

and i would think you would suffer serious bore flex even if it went that far...

maybe at 86mm and 2160cc it might just run..not a proper 2.2...

only other way would be a longer stroke crank in an engine with a much longer stroke than is optimum anyway..

think a proper 2.2 would lose power over a good 2.0

[qwerty]

OOOH Its durham so must be local to me!! If my Valver was running I'd go ava deek!

[number1]

All that spec! no wonder he cant afford a camera!!

[Allan]

primers conversion is overbore to 2.1

[MatrixGuy]

I got me money at the ready! lol :lol:

[J o n]

lol, what a bellend, you cant 2.2 a Williams as the cylinder walls are too thin... I suppose you could, but that chav ****wit would have killed it by now.

love the fact it has "chips" too... dual ECU's? :lol:

[Bailey_1260]

love the fact it has "chips" too... dual ECU's? :lol:

no, when you buy the car he leaves a bag of chips on the passenger seat for the drive home :P