Tammboy
04-08-2008, 21:44
I've just managed to get the rev dial working and the engine idling at about 2.5 on the counter. I replaced the red thing (fuel/oxygen mix) bit last week so had a fiddle with that to get it down but could only get to 1.9.
Looked around the accelerator cable and there's a few points either side where possibly it could be loosened (left by red things and right on gas table) however the left screw is hard to move and possibly seems at its limit.
So question is how do i go about getting the idling speed down?
Any help much appreciated - thanks.
Looked around the accelerator cable and there's a few points either side where possibly it could be loosened (left by red things and right on gas table) however the left screw is hard to move and possibly seems at its limit.
So question is how do i go about getting the idling speed down?
Any help much appreciated - thanks.