View Full Version : custom made heatshield (testing the water)
right guys and girls ive just picked up my custom built heatshield wanted something more than a standerd heatshield. so i askd my mate to see if he can knock me up one simular to number1`s heatshield.
by the way the renault badge will be added next weekend as im going to devon this weekend.
hes prepared to make a bulk of these if i have the right number for intrest min of 8 and they will be £50 posted these are made of stainless steel with a mirror finish on the manifold side.
first heres the pics:
out the bay:
http://i18.photobucket.com/albums/b117/ant_corsa/S6300745.jpg
in the bay:
http://i18.photobucket.com/albums/b117/ant_corsa/S6300746.jpg
so lets start a list of intrest i need a confirmed number of people by a week monday and i will post up pics of the heatshield with a badge on it.
1.
Im intrested.. any chance of getting one made from ally as it's a better material for a heatshield. Send us a pm if is possible.. Cheers.
could you make them a little taller?
Im intrested.. any chance of getting one made from ally as it's a better material for a heatshield. Send us a pm if is possible.. Cheers.
my mate is making a bulk out of the s/s thats it realy mate hes got one out of s/s on his golf(with audi tt turbo lump in it) custom made for his car and it does wonders for his engine as the hotter the manifold the quicker the gases get out of your exhaust as he says lol so there you go.
sorry dude
could you make them a little taller?
how much taller?
so far:
1.FATBOY
2.
who eles?
could you make them a little taller?
how much taller?
About 2 inches? I'd be deffo interested.
To match the height of the standard one really - looks a bit short - I'm after the bling :lol:
[quote="ant84"]so far:
1.FATBOY
2.STAVROS
white16valver
04-07-2008, 21:04
If I can find some money :roll: :( and they were a little bit taller, I'd also be interested :)
If I can find some money :roll: :( and they were a little bit taller, I'd also be interested :)
So thats 4 of us already :D
I'm also interested, again if its the same height as the original it would be better!!
ill put it forward to my maker to make them an extra two inches longer keep the list going.
and to clarify is it 2 inches on the top or bottom needed????
thanks peeps btw they look mint in the engine bay ;)
as im away anyone intrested plz give me a txt on 07510925919 with questions thanks ant
Two inch to the top - had anyone got one to hand to measure?
I'll pop mine off tomorrow if I have time and measure it unless anyone has one already out.
stevie_b
05-07-2008, 22:18
Mine is currently off so can save you a job removing yours Daz. What do you need, the total measurement from bottom to top of the standard shield?
Aye just a rough measure of the total height - and maybe where it screws to the bulkhead so it sits at the right height :D
stevie_b
08-07-2008, 22:38
Total height is 385mm. That's if it was one piece, since there are various bits chopped out of it so it doesn't actually measure that from top to bottom at any point! Can measure where the screw holes are once I check under the bonnet to remember which way up it fits :lol:
right peeps my mate needs figures by 2mora as it says in the first post need a min of 8 peeps.
payments are still to be confirmed i dont think he has paypal so i think it will be going through me, the heatshields will most likly be made before next weekend and then sent out as long as payments have been recieved.
Tullyvernon
11-07-2008, 19:05
1.FATBOY
2.STAVROS
3.Tullyvernon
I'm also interested if you can post to holland.
postage will be paid offcoourse :wink:
1.FATBOY
2.STAVROS
3.Tullyvernon
4.Daz (if correct to original size)
1.FATBOY
2.STAVROS
3.Tullyvernon
4.Daz (if correct to original size)
5.Adi82 (if correct to original size)
spikey-ben
13-07-2008, 15:18
1.FATBOY
2.STAVROS
3.Tullyvernon
4.Daz (if correct to original size)
5.Adi82 (if correct to original size)
6.spikey-ben
havent spoke to my mate as hes ill so hopfuly be 2mora and i can confirm whats going on ok lads and lasses
need two more to start making them peeps
wazza16v
15-07-2008, 22:26
1.FATBOY (if correct to original size)
2.STAVROS
3.Tullyvernon
4.Daz (if correct to original size)
5.Adi82 (if correct to original size)
6.spikey-ben
7.Wazza16v (if correct to original size)
do you also send to the Netherlands and receive payments via paypal? Then i'm in.
if you cover the extra for overseas postage fella you can have one
1.FATBOY
2.STAVROS
3.Tullyvernon
4.Daz (if correct to original size)
5.Adi82 (if correct to original size)
6.spikey-ben
7.Robo (not on williams)
8.Wazza16v (if correct to original size)
right guys and girls need a defo now peeps as my mate will start making as soo as he recives payment i will post up his paypal addy asap so is every defo intrested and want one.
Danny-ACE!
18-07-2008, 03:04
1.FATBOY
2.STAVROS
3.Tullyvernon
4.Daz (if correct to original size)
5.Adi82 (if correct to original size)
6.spikey-ben
7.Robo (not on williams)
8.Wazza16v (if correct to original size)
9.Danny-ACE! (if they are the right size)
Danny-ACE!
18-07-2008, 03:04
Oh, sorry. Count me out.
So just to confirm, will this fit my williams 1? has it had been changed to bring it closer to the original heatshield dimentions? and will all have the Renault logo on?
So just to confirm, will this fit my williams 1? has it had been changed to bring it closer to the original heatshield dimentions? and will all have the Renault logo on?
I don't want one with a logo so I hope not!
spikey-ben
26-07-2008, 18:50
Notice there hasnt been any news on these for a week or so, deffo still want one but aint going to be online for the next week because i will be in hospital. Hopfully i will be out sooner but last time i went i had a bit of a nightmare time in hospital but i can pay when i get out.
Cheers Ben
sorry peeps had a very very busy week, it will be made almost the same size as origanl and there will be no renault badge on them.
i will speek to my mate 2mora again and remind him we need his paypal addy to send payments to once hes recieved the payments of all he will start to make them.
spikey-ben
05-08-2008, 16:08
Bump
Guessing this idea has died a death, Im out of hospital now and am moving again. If anyones intressted i might be able to get these made anyway from a friends company. Will have to take my heatshield off and see wot he can make. :)
Aye well I was still waiting for an update!
update!!!!!
spoke to my mate yesterday
he said he will get them all made by pod meet in october he said hes sorry about the wait, hes down on staff in his workshop and got his missis hairdressers to finish off so hes totaly worked off his feet.
now all payments have to go through me as he said, his works exactly "cant be arsed with pc`s" so i said ill deal with the money as long as he gets them made befor pod in october.
now for thoes who wanted one and are going to pod please put it next to your names if your not going im gonna need your postal address so as soon as ive got your payments and there made ill send them too you.
so to those who wants one please send £50 for the posted ones or £45 not posted to ant_corsa@hotmail.co.uk on paypal.
btw the heatshields will be made 2inchs taller unless other requests are made then we will adjust them but i will need to know asap.
thanks for understanding girls and guys.
if you would like to talk to me please call 07510925919
cheers
list so far:
1.FATBOY
2.STAVROS
3.Tullyvernon
4.Daz (if correct to original size)
5.Adi82 (if correct to original size)
6.spikey-ben
7.Robo (not on williams)
8.Wazza16v (if correct to original size)
right guys and girls
12 are getting made in time for trax plz can the above peeps on list get in touch asap to confirm if they still want them if not its first come first surve at trax at £45 a time ok peeps.
Can we get new pictures please the old ones have vanished.
http://i18.photobucket.com/albums/b117/ant_corsa/clio%20pics/S6300745.jpg
b4
http://i18.photobucket.com/albums/b117/ant_corsa/clio%20pics/S6300744.jpg
after
http://i18.photobucket.com/albums/b117/ant_corsa/clio%20pics/S6300746.jpg
its gonna be made 2inchs higher as requested a few times anymore requests plz can i have them b4 monday as thats when hes starting them cheers
SIMONCLIODIMMA
30-08-2008, 10:23
mite be interested but cant see the photos ???
the pics work fine to me, anyone eles cant see pics above?
white16valver
02-09-2008, 20:56
I can see them :)
but sadly I can't afford one - looking like track rods, rear discs and bearings, and a brake fluid flush for me, on top of insurance and tax... :cry:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.