PDA

View Full Version : Cup racer damper specs???


Evogone
04-06-2008, 09:16
Any one know the specs front and rear:-

damping rate
rod length as i think its a lot shorter than std.
Part numbers

Anything really
Evogone
04-06-2008, 10:24
Any one know the specs front and rear:-

damping rate
rod length as i think its a lot shorter than std.
Part numbers

Anything really

Also what the rear damper length mounting hole center to center - open & closed.
105epwr
05-06-2008, 22:15
didnt the cup racers use DE-carbon items fitted to the std mounting points etc which were renault items-sorry dont the the damping rates etc,i just bolted mine on- tracked it all up then tracked it on the circuit!
Evogone
05-06-2008, 23:03
didnt the cup racers use DE-carbon items fitted to the std mounting points etc which were renault items-sorry dont the the damping rates etc,i just bolted mine on- tracked it all up then tracked it on the circuit!

Yes but want to know the damper rates, where they shortened length rods front and rear, what the the spring rates etc.

Reason being so when i get my new fancy suspension i can use this as the base reference then start adjusting from there.

Any one have the codes ? Im sure they are different to the std Williams stuff.
MAXIBOY
06-06-2008, 09:29
what's your fancy new suspension...
Evogone
06-06-2008, 15:06
what's your fancy new suspension...

Either the Ledas i have or the ASTs i really want.

I want to start off with the same set up i have now (spring and damper rates / rod lengths (open / closed) / ride hights) then i can always have this as a reference, then start fiddling..!!!!

Save me taking mine off the measure it all.