PDA

View Full Version : High Spec 16v (and other) Parts



Colin_S
01-06-2008, 13:05
LEDA Coilover Kit - Never fitted - Fast Road Setup - £650
http://www.cliosport.net/forum/showt...hlight=Colin_S

High Spec 4 Pot, 325mm Kit - Never Fitted - £550
http://www.k-tecracing.com/show_product.asp?id=869

NOS Direct Port Kit with Purge Kit - £450
http://www.holley.com/05082NOS.asp

Full Powerflex Polly Bush Kit - Never Fitted - £100
http://www.k-tecracing.com/show_product.asp?id=1053

B&M Short Shift - Never Fitted - £90
http://www.k-tecracing.com/show_product.asp?id=198

One of the highest spec 2.0 16v Williams N/A Engines ever built. Speak to Andy at GDI for full details on bottom end and Ben at Angleworks for head.
Bottom End:
Williams Bottom End
Lightened and ballanced everything
Knife Edge Crank
Shot Peed everything
Forged Pistons
Head:
Megan Head
Ported and Polished
Highest Profile Angleworks Cams for hydraulic lifters
Angleworks Vernier Pulleys
Custom Valves, largest that fit the head, (all 16)
Basically everything that can be done has been done

Omex Stand Alone ECU
The engine has never been fitted and the head and bottom end is still seperate. I have paid for everything to be done, engine built and setup,

The engine has been designed for throttle bodies which will need to be purchased.

Est BHP about 250

Over 8k spent, looking for offers in the region of 3k

Colin_S
01-06-2008, 13:09
LEDA Coilover Kit - Never fitted - Fast Road Setup - £650
http://www.cliosport.net/forum/showthread.php?t=56136

105epwr
01-06-2008, 19:01
pm"d matey

mark
01-06-2008, 22:05
shame colin, did you ever sought out who stole/lost your car and get them back? How comes your selling up?

doug2.0
01-06-2008, 22:11
id like the powerflex kit, are you open to any offers as its only a pound more on ktec

Colin_S
02-06-2008, 12:09
shame colin, did you ever sought out who stole/lost your car and get them back? How comes your selling up?

Kind of, it's still ongoing through the courts, that can take a while. I'm just moving on now buddy, with the car gone i'm just not into it anymore.


id like the powerflex kit, are you open to any offers as its only a pound more on ktec

Didn't notice it had come down so much, they are pretty much sold anyway but i'll let you know if it falls through.

B&M also sold

Evogone
02-06-2008, 13:48
Im asuming the Ledas ar for a 16v / Williams ?

On the front struts can you measure the piston length when fully extended. Just want to compare this to the ones i have as some have got shortened rods and some have std length.

Thanks you.!!!!

Colin_S
02-06-2008, 17:44
Polly Bush Kit sold



Im asuming the Ledas ar for a 16v / Williams ?

On the front struts can you measure the piston length when fully extended. Just want to compare this to the ones i have as some have got shortened rods and some have std length.

Thanks you.!!!!

I'll try to bud

matty w
02-06-2008, 22:25
Im asuming the Ledas ar for a 16v / Williams ?

On the front struts can you measure the piston length when fully extended. Just want to compare this to the ones i have as some have got shortened rods and some have std length.

Thanks you.!!!!did you say your leda's fit both mate?

Colin_S
02-06-2008, 22:34
Na don't do a willy without modding to bottom mounts

Colin_S
03-06-2008, 21:02
http://www.smithspace.co.uk/2.JPG

http://www.smithspace.co.uk/3.JPG

http://www.smithspace.co.uk/4.JPG

http://www.smithspace.co.uk/5.JPG

http://www.smithspace.co.uk/6.JPG

http://www.smithspace.co.uk/7.JPG

http://www.smithspace.co.uk/8.JPG

http://www.smithspace.co.uk/9.JPG

http://www.smithspace.co.uk/10.JPG

http://www.smithspace.co.uk/11.JPG

http://www.smithspace.co.uk/12.JPG

http://www.smithspace.co.uk/13.JPG

http://www.smithspace.co.uk/14.JPG

http://www.smithspace.co.uk/15.JPG

http://www.smithspace.co.uk/16.JPG

http://www.smithspace.co.uk/17.JPG

http://www.smithspace.co.uk/18.JPG

DaveH
03-06-2008, 22:58
Hi mate, would you sell any of the engine parts seperate, i.e. head seperate to block etc or is it as a whole?

Colin_S
14-06-2008, 19:46
bump

dimmajon
15-06-2008, 04:40
whats cheapest you could do the nos kit for? bit out of me price range dat

Colin_S
27-08-2008, 19:59
Engine now sold!!!!!!!

The following are still available, PM me or e-mail on colin@smithspace.co.uk

LEDA Coilover Kit - Never fitted - Fast Road Setup - £650
http://www.cliosport.net/forum/showt...hlight=Colin_S

http://www.smithspace.co.uk/Parts/2.JPG

http://www.smithspace.co.uk/Parts/3.JPG

http://www.smithspace.co.uk/Parts/4.JPG

http://www.smithspace.co.uk/Parts/5.JPG

http://www.smithspace.co.uk/Parts/6.JPG

http://www.smithspace.co.uk/Parts/7.JPG


High Spec 4 Pot, 325mm Kit - Never Fitted - £550
http://www.k-tecracing.com/show_product.asp?id=869

http://www.smithspace.co.uk/Parts/8.JPG

http://www.smithspace.co.uk/Parts/9.JPG

http://www.smithspace.co.uk/Parts/10.JPG

http://www.smithspace.co.uk/Parts/11.JPG

http://www.smithspace.co.uk/Parts/12.JPG

http://www.smithspace.co.uk/Parts/13.JPG

NOS Direct Port Kit with Purge Kit - £450
http://www.holley.com/05082NOS.asp

http://www.smithspace.co.uk/Parts/14.JPG

http://www.smithspace.co.uk/Parts/15.JPG

http://www.smithspace.co.uk/Parts/16.JPG

http://www.smithspace.co.uk/Parts/17.JPG

http://www.smithspace.co.uk/Parts/18.JPG

Colin_S
13-09-2008, 17:23
Ledas sold now

Colin_S
21-09-2008, 17:21
Anyone interested in the NOs or brakes?

Allan
22-09-2008, 11:51
are those brakes for 17s only ? or will they fit under a 16?
what is the total space needed ta

Colin_S
25-09-2008, 20:05
They wont fit under 16s buddy. Not sure what the total space required is.

Colin_S
28-09-2008, 10:37
and should say they will only fit under a 17" wheel or larger

Colin_S
28-09-2008, 13:01
NOS now kit on ebay:

http://cgi.ebay.co.uk/Direct-Port-Nitrous-Kit-Holley-NOS-with-Purcge-Valve_W0QQitemZ250301141932QQcmdZViewItem?hash=ite m250301141932&_trkparms=39%3A1%7C66%3A2%7C65%3A2%7C240%3A1318&_trksid=p3286.c0.m14

Colin_S
10-10-2008, 09:08
Nitrous gone now, just got the brakes left now.