View Full Version : boostage!
Justin..
23-05-2008, 02:01
http://i14.photobucket.com/albums/a341/justin_2k5/P220508_193902.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/P220508_1938.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/P220508_1939.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/P220508_1940.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/P220508_193901.jpg
wooop wooooop!!!!
AndyFielder
23-05-2008, 09:57
HOW long it the IC tubing!!
You know one of those intercooler pipes get hot right, its very close to a few of those coolant hoses ;)
HOW long it the IC tubing!!
As long as it needs to be, and as short as possible :wink:
Looks good mate...
AndyFielder
23-05-2008, 10:13
:roll:
Justin..
23-05-2008, 10:13
HOW long it the IC tubing!!
As long as it needs to be, and as short as possible :wink:
Looks good mate...
^ aye lol cheers. no other options in routing imo. i've seen it go under the enine before but it wasn't as pretty imo :oops: :lol: may change the intercooler at a later date for a bigger one with both pipes on the same end.
it will be fine mate, i wouldnt worry about it.
jutin,
what is the diameter of your IC pipes?
2" or 2.5" ?
AndyFielder
23-05-2008, 11:51
63mm i would guess...
I have lengths of this i can sell to anyone who is interested :)
Justin..
23-05-2008, 13:29
yeah 63mm (2 1/2'' in old money)
tnx mate
iirc you bought a whole kit off ebay.
was one kit enough? or did you have to use additional kits / pipes?
Justin..
23-05-2008, 16:41
i bought 2 kits
both had same parts but different quantitys. cost about £150 in the end for pipe work :D
still have the url from the sites where you bought them from?
You know one of those intercooler pipes get hot right, its very close to a few of those coolant hoses ;)
No they don't :wink:
Heh, Everyone's a critic - until it's their turn!
Justin..
24-05-2008, 21:28
still have the url from the sites where you bought them from?
it was just ebay mate
search 2.5 piping.
AndyFielder
26-05-2008, 12:37
I do have miles of this i can sell people.
Andy
I do have miles of this i can sell people.
Andy
panic buy went wrong ??? :roll:
:D :P :wink:
AndyFielder
26-05-2008, 14:00
minimum order for the length i needed for the scuttle mod... 8meters!
pleased with that
makes sure none of those are goin to pop off (spray a bit of hairspray on the insides of the silicone hosing where it joins the metal pipes), looks like some will be tricky to got too once bodyworks back on
Justin..
26-05-2008, 17:59
Cheers for the tip!! i shall do that before i re-fit the radiator
Cheers for the tip!! i shall do that before i re-fit the radiator
no worries :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.