View Full Version : brake pipes
dimma16v
14-05-2008, 12:29
anyone no the lenth of all the brake pipes and what connection are on them as i want to replace all the pipes and i got quoted £25 plus P+P from Automec but they need to no the lenth of each pipes and what fittings are on them aswell.
Fittings are 1.0mm x 10mm, couldn't tell you the total length, will have to get a piece of string and tape measure out
donsrno1
14-05-2008, 16:38
anyone no the lenth of all the brake pipes and what connection are on them as i want to replace all the pipes and i got quoted £25 plus P+P from Automec but they need to no the lenth of each pipes and what fittings are on them aswell.
Would they be with pipes for replacing pretty much all the standard brake pipes on the car? with the exception of the flexi bits?
If so I would be interested to know if you can find out what length they all are as I'm thinking of replacing them all on the hybrid over the summer.
Get a big role of copper pipe, cheap enough, and easy enough to get hold of should you need any more.
If you are doing it yourself don't forget to allow for wastage for the bits you **** up
donsrno1
14-05-2008, 19:04
Get a big role of copper pipe, cheap enough, and easy enough to get hold of should you need any more.
If you are doing it yourself don't forget to allow for wastage for the bits you f**k up
Yeah I think I will look into doing that over the summer. I've never done much with the brake lines tbh but can't see it being too difficult.
If you were to get all the bits yourself has anyone got any idea what sort of price you would be looking at in total?
roll of pipe was 7.50 ends were 10p each..x 16 i think..
plus hoses..
I got a nice hand flairer off ebay for about a tenner iirc, need to do a double male flair iirc
what size pipe would you need?
theres kits on ebay, handfull of fittings, pipe bender,cutter, flaring tool and pipe for around 40quid
http://cgi.ebay.co.uk/BRAKE-PIPE-REPAIR-KIT-PIPE-ENDS-FLARER-CUTTER-BENDER_W0QQitemZ360049407877QQihZ023QQcategoryZ990 3QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
another
http://cgi.ebay.co.uk/BRAKE-PIPE-REPAIR-KIT-PIPE-END-FLARER-CUTTER-BENDER-Y45_W0QQitemZ220234327333QQihZ012QQcategoryZ9903QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem
Don't need a bander, its soft enough to be bent by hand, i used a hacksaw ad a fine file, on my penknife for cutting and de-buring, 3/16" rings a bell, but its just std car stuff, ends i got from local car shop for pence each
kits are good valve there i think...
as the flaring tools aren't usually cheap..bewnding tools ok if you need over 90 degree bends..pipe cutter means you get clean 90 degree perfect ends to flare every time..
cool i will ad a kit on my list of prts for when i plumb a bias lalve in
dimma16v
15-05-2008, 01:54
thanks for the reply i think i'll just make my own just need to no if there Imperial/Metric fittings i need.
at 10 x 1mm i would say metric
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.