wilwood disc advice + stalling

[fasterthanjesus]

i only ever post problems! (sorry) :oops:

firstly my brembo max front discs have badly warped on drivers side. is this normal? fitting problem? or disc problem that is covered under warranty (less than a year old).?

anybody recommend a better disc? and pad?

secondly

car keeps stalling at junctions. new idle valve on order. and ive removed the battery overnight. anything else i should be checking?

cheers

carless in lancaster.


:cry:

[16v_paddy]

The disc problem could be dodgy fitting, dodgy disc or both

Have you got wilwoods? I've got dynalites and I'm usin my old(ish) ebc discs, done about 2k miles and not had any issues, like yours with the discs.

As for the stalling/idle, check for the usual air leaks
Also saw in another thread, if new iscv does nothin check coolant temp sensor, lambda sensor and consider the possibility of needing a new cat (if u have 1 :roll: ) as that fixed someone elses similar problem

[Lunner]

Do you happen to sit with your foot on the brakes at traffic lights etc, esp after giving it some, or when braking hard from 80ish downwards??

If you sit with your foot on the brakes when they are hot you will warp the discs, hence why when you do a trackday people tell you not to use the handbrake, as it warps the rear discs

[fasterthanjesus]

i dont ever have my car back long enough to "give it some" :cry:

going back to standard all round.